User`s guide

Tuning the Playlist Audio
Once your instrument is in tune with the tuner, the
tuning of the playlist audio must be set. The tuning level
can be set as described in Chapter 12, however, to assist
in tuning, a tuning loop can be set up. A tuning loop is a
section of the audio file that will be repeated
continuously so that proper tuning can be obtained.
To set up a tuning loop, follow these steps:
1. First identify a clean note in the audio file that you
wish to have repeated indefinitely.
2. Move the playback position to just before the note.
3. Select Set Left Locator from the Tuning button’s
menu. This will change the tuning loop left position
readout to the current position.
!!
98 Tuning! Solo Performer Show Controller User’s Guide