User`s guide

events, hotkey events, and a lightshow. When the playlist
is run, the audio plays item by item through the
computer. This audio can be routed to a PA system for
higher performance. While the audio plays, the lyric
events are displayed on-screen, MIDI events are sent to
e"ect units through the computer’s MIDI interface, and
lighting events are output to either DMX512 or MIDI
lights to create light scenes in synchronization with the
audio.
The system supports 32 channels of DMX512 or MIDI
lighting control. If you are new to DMX512 lighting, refer
to Appendix A1 for an introduction.
The foot controller’s default functions are as shown
below:
The foot switch functions are as follows, from left to
right:
!!
10 Introduction! Solo Performer Show Controller User’s Guide