User`s guide

In this example, Solo Performer Show Controller found
that there are two MIDI devices connected to the
computer’s MIDI system: a TC Halion VoiceLive e"ect unit
and a Digitech GNX3 guitar processor. If you don’t see
your MIDI devices showing up, choose the Launch MIDI
Control Panel… menu option on the MIDI pull down
menu. This will open up your computer system’s MIDI
control panel so that you can debug your setup.
Now select the channel that the device will receive the
commands on.
If you are uncertain about which channel number to use,
try using channel 1. Most MIDI devices look for MIDI
!!
126 MIDI! Solo Performer Show Controller User’s Guide