User`s guide

To abandon the work in the Device Editor, choose the
Cancel button to exit from the Device Editor without
saving a device file.
Defining New MIDI Devices
MIDI light devices are defined using the Device Editor
window, much like DMX512 devices. MIDI light devices
can be configured in several ways:
1. Change settings based on Note-On command
velocities.
2. Change settings based on Poly Aftertouch
command amounts.
3. Change settings based on a Control Message
command’s value.
4. Change settings based on a program change.
In all cases, the value that is sent to the light is what is
defined in the device editor. This can be velocity, poly
after-touch amount, control value, or program number.
The parameter that determines what light will get the
command is not defined here. For example, the note
number or control number could be used to determine
what light is to respond to the command. This is done in
by setting the channel number. Details of how to do this
follow later in Configuring the Channels in this chapter.
!!
Alien Apparatus Company, Inc.! ! Lights 147