User`s guide

After choosing a device for the channel, the device’s icon
will appear in the button.
The address that will be used for the channel is selected
by the popup menu as shown below. If the device used
for this channel is a DMX device, this address must
match the address set on the lighting device. Also, the
address must be in the range of 1 to 32. Refer to your
lighting device’s manual for information on setting up its
address. This is usually accomplished by setting DIP
switches on the device.
If the light device used with this channel is a MIDI device
using Note-On or After-touch commands to control the
lights, the Channel number refers to the MIDI note
number that is assigned to this light. If the light device
uses MIDI control messages to control the lights, the
!!
Alien Apparatus Company, Inc.! ! Lights 155