User`s guide

XLR Connector! A three-pin connector that is used to

connect DMX512 devices. Note that the DMX512

standard calls for using 5-pin connectors. In practice,

only three pins are commonly used, and just about all

lighting device manufacturers have switched to three-pin

connectors. The foot controller used in the Solo

Performer Show Controller uses a three-pin arrangement

that is of the most common conﬁguration and wiring.

Because this is not a true standard, be sure that your

DMX512 devices are wired per the diagram that is

printed on the foot controller next to the connector.

250 Glossary! Solo Performer Show Controller User’s Guide