User`s guide

choose what instrument will be used for each track in the
song.
I have an expensive high-quality MIDI sound module.
How can I use it with Solo Performer Show Controller?
One of two things can be done. The sound module could
be attached to the MIDI system of your computer, and
you can setup Solo Performer Show Controller to play
MIDI files to it by selecting the sound module as the MIDI
file destination in the MIDI preferences.
Alternatively, if you don’t want to bring your expensive
gear with you on the road, you can play a MIDI file to the
sound module and record its output as an audio file,
using recording software. Then, open the recorded audio
file up in Solo Performer Show Controller.
I want to run a light show, but my lights don't change.
What is wrong?
First, make sure that the light device addresses are set
up correctly following the light manufacturer’s
instructions. Secondly, make sure that the channel that
is controlling the device in Solo Performer Show
Controller is set to the correct address. This can be seen
in the lightshow editor window. Thirdly, make sure that
your cabling is correct and that the wiring on the lighting
device matches the diagram on the foot controller.
Lastly, make sure that you are using a terminator on the
last DMX512 device in the chain.
!!
Alien Apparatus Company, Inc.! ! FAQ 255