User Manual

CHAPTER 2 READER HARDWARE INSTALLATION AND OPERATION
ALR-F800 HARDWARE SETUP GUIDE
DOC. CONTROL #8102141-000 REV A
14
 If you are using the AC/DC power brick, connect a cross-over
Ethernet cable to the ALR-F800 LAN/PoE port and to the PC LAN
port.
Figure 10 – PoE Power Supply and Network Connection Diagram
Figure 11 – 12V DC cord and Network Connection Diagram
 The reader comes preconfigured to look for a DHCP server to set its
network parameters. In the absence of a DHCP server, the reader will
use the following settings: