Integration Guide

CHAPTER 1 INTRODUCTION
ALR-M702-FCC USER AND INTEGRATION GUIDE
DOC. CONTROL #TBD REV A
1
Chapter 1
Introduction
1.1 About this Manual
This manual provides you with safety information, technical support information, and sources for
additional product information.
Who should read this manual?
This manual is written for the person who is responsible for integrating the ALR-M702-FCC
module into host equipment. This manual provides you with information about the features of the
ALR-M702-FCC and how to integrate, configure, operate, and maintain it.
Before you operate your ALR-M702-FCC, please read through and become familiar with the
contents of this manual.
Introduction
The ALR-M702-FCC is a limited certification module for use in Alien developed products. It is
not for sale to outside companies and this manual is considered a confidential manufacturing
document per KDB 996369 D03 OEM Manual v01. The module is a compact RFID EPC Gen 2
reader. Only the BRA-40U antenna may be used with this module.
1.2 Device Specifications
ALR-M702-FCC Characteristics
Dimensions 56x36x7.5 mm
Weight <25 grams
RF Interface MMCX-50KE
Power and Control 12 Pin ZIF Ribbon Cable Connector
Operating Temp. -20℃ to +55℃
RFID (UHF)
UHF 902-928MHz,
EPC Class1 Gen2 / ISO18000-6C
Input Voltage/Current
3.3 VDC (min) @ 2.9 ADC (max)
5.5 VDC (max) @ 1.1 ADC (typ)
Frequency of Operation 902 – 928 MHz
FHSS Parameters 50 channels, 500 kHz spacing, 400 mS hop time
Approved Antennas Alien version of BRA-40U
RF Output Power 0.975 watts
Control Line Voltage 0 – 3.3 VDC