User's Manual

CHAPTER 2 BASIC FUNCTIONS
ALH-901X USER’S GUIDE
DOC. CONTROL #8102117-000 REV D
13
Screen Calibration
The first time the device is used, or if you haven’t used the device for a long time, you may find that
you cannot accurately select the place where you touch with the stylus. In this case, you need to
perform the screen calibration.
[Start] > [Settings] > [System] > [Screen] > [Align Screen]
Press and hold the stylus pen briefly on the center of the cross symbol, and repeat five times as it
moves around the screen.
Setting System Sounds
You can set which system sounds are enabled (including vibrations) in the Sounds & Notifications
control panel.
[Start] > [Settings] > [Sounds & Notifications]
You can adjust the volume quickly by folding the Fun button while pressing the Up and Down
button along the left side of the unit.