User's Manual

RFID TAG READER CHAPTER 3
ALH-901X USER’S GUIDE
DOC. CONTROL #8102117-000 REV D
28
Tag Mask – Scan
Select a tag from the list and click the Set
Mask to Selected Tag button. To clear
the mask, click an empty part of the list
and then click the Clear Mask button.
The Scan tab acts just like the Inventory
screen – start/stop the reader with the
trigger or Start Scan button, and all tags
in range are displayed.
Masks defined with the Scan method
are displayed on the utility screens as
simply the full EPC of the tag.
You can also click on the Load button to
import a list of tags, either one you
created yourself (one EPC per line) or a
saved list from the Inventory screen.