User's Manual

CHAPTER 6 READER-HOST PROTOCOL
NANOSCANNER READER USER GUIDE • DOC # 8101029-000 REV A 85
© 2003 Alien Technology™
<Reason>TEST MESSAGE</Reason>
<Alien-RFID-Tag-List>
<Alien-RFID-Tag>
<TagID>0102 0304 0506 0709</TagID>
<CRC>87B4</CRC>
<DiscoveryTime>2003/01/17 11:37:01</DiscoveryTime>
<Antenna>0</Antenna>
<ReadCount>1413726</ReadCount>
</Alien-RFID-Tag>
<Alien-RFID-Tag>
<TagID>2283 1668 ADC3 E804</TagID>
<CRC>9FD0</CRC>
<DiscoveryTime>2003/01/19 07:01:19</DiscoveryTime>
<Antenna>0</Antenna>
<ReadCount>1</ReadCount>
</Alien-RFID-Tag>
</Alien-RFID-Tag-List>
</Alien-RFID-Reader-Auto-Notification>
G
ET MAILSERVER
S
ET MAILSERVER
The MailServer command pair allow you to define an SMTP (simple mail transfer
protocol) mail server. This mail server is used only when automatic notification is
configured (see Notify commands) and is set to use Mail as its delivery method.
NOTE: Changes to this setting will take immediate effect.
Example
Command
Response
>Get MailServer
>MailServer=12.34.56.78
Command
Response
>Set MailServer=45.224.124.34
>MailServer=45.224.124.34
G
ET MAILFROM
S
ET MAILFROM
The MailFrom command pair allow you to define the email address associated
with the Nanoscanner. The emails sent out by the Nanoscanner will have this
parameter set in the From: field of the email header.
NOTE: Changes to this setting will take immediate effect.
Example