User's Guide Part 1

CHAPTER 4 READER-HOST COMMUNICATIONS INSTALLATION
NANOSCANNER READER USERGUIDE • DOC ??? 35
© 2003 Alien Technology™
• If value is not accepted, reader will return “0.0.0.0”.
9. Type “Reboot” to reboot the reader and implement the commands.
To verify your network connection to the reader:
10. Launch a browser.
11. Enter the reader’s assigned IP address.
• If the IP address is valid, the Alien reader portal will display.
12. For Web access, click the [ENTER] box.
For Telnet access, skip to step 13.
13. At the prompt, enter your username and password. (These are case
sensitive and must be typed as specified.)
Current settings are:
• Username = alien
Web portal (above)
Telnet portal (right)