User's Guide Part 1

CHAPTER 7 WEB BASED APPLICATION EXAMPLES

NANOSCANNER READER USERGUIDE • DOC ??? 54

Example

Command

Response

>Get HeartbeatTime

>HeartbeatTime=30

Command

Response

>Set HeartbeatTime=60

>HeartbeatTime=60

ET COMMANDPORT

The reader can be configured and operated over the network using standard

network sockets. The CommandPort settings are used to assign and retrieve the

exact port number used by the reader for this network connectivity.

• The default setting for this command is 23 (the standard Telnet port)

Changes to this setting do not affect serial communication and/or Web

communication with the reader.

NOTE: Changes made with this command will take effect immediately.

Example

Command

Response

>Get CommandPort

>CommandPort=23

Command

Response

>Set CommandPort=10004

>CommandPort=10004

Network Commands – Web Based

Network commands are issued via the Web page to set up and access reader

networking parameters.

OMMANDS/OPERATIONS VIA WEB NETWORK TAB

Command equivalents found on the Web-based “Network” tab are:

• Get DHCP

Toggles DHCP

On and Off

Web view

Network tab

covers all Get

and Set

network

commands.