Manualshelf

User's Guide Part 2

ManualsBrandsAlien Technology ManualsElectronicsFrequency Hopping Tag Identification Reader
11121314151617181920
CHAPTER 5 READER-HOST PROTOCOL
<DiscoveryTime>2003/01/17 11:37:01</DiscoveryTime>
<Antenna>0</Antenna>
<ReadCount>1413726</ReadCount>
</Alien-RFID-Tag>
<Alien-RFID-Tag>
<TagID>2283 1668 ADC3 E804 2939 2021</TagID>
<CRC>9FD0</CRC>
<DiscoveryTime>2003/01/19 07:01:19</DiscoveryTime>
<Antenna>0</Antenna>
<ReadCount>1</ReadCount>
</Alien-RFID-Tag>
</Alien-RFID-Tag-List>
</Alien-RFID-Reader-Auto-Notification>
G
ET MAILSERVER
S
ET MAILSERVER
The MailServer command pair allow you to define an SMTP (simple mail transfer
protocol) mail server. This mail server is used only when automatic notification is
configured (see Notify commands) and is set to use Mail as its delivery method.
NOTE: Changes to this setting will take immediate effect.
Example
Command
Response
>Get MailServer
>MailServer=12.34.56.78
Command
Response
>Set MailServer=45.224.124.34
>MailServer=45.224.124.34
N
OTIFYNOW
The NotifyNow command instructs the reader to send out an immediate
notification of its tag list to the address currently set by the NotifyAddress
command.
Example
Where the reader is set to notify a Telnet
address.
Command
Response
>NotifyNow
>Notification sent to Telnet
Where no NotifyAddress has been set.
Command
Response
>NotifyNow
>Notification Address not set