User's Guide

CHAPTER 4 READER-ENTERPRISE PROTOCOL
Notify Commands
G
ET NOTIFYADDRESS
S
ET NOTIFYADDRESS
Description: The notify address command pair specify where messages
should be sent to when they arise and how they should be sent. The form of
the address determines the method of delivery. Currently there are 3 delivery
methods supported:
NotifyAddress Description
blank Do not use automatic notification.
[e-mail] Send a message via Email to the address specified. The
address is specified in standard email form i.e.,
[e-mail]
Note that the MailServer parameter must be configured for
this to work (see Network Commands)
hostname:port Send a message to a specified port on a networked
machine. The address takes the form hostname:port. For
example “123.01.02.98:3450” or
“listener.alientechnology.com:10002”
serial Send a message to the serial connection. The word
“serial” is used as the address. The word is not case
sensitive.
Changes made with this command will take effect immediately.
By default setting is OFF.
Example
Command
Response
>Get NotifyAddress
>NotifyAddress=10.1.0.12:4000
Command
Response
>Set NotifyAddress=[e-mail]
>OK
NANOSCANNER READER USER GUIDE • DOC # 8101001-000A 44
© 2002 Alien Technology™