User's Guide

CHAPTER 4 READER-ENTERPRISE PROTOCOL
GET NOTIFYTIME
SET NOTIFYTIME
Description: The notify time defines the time interval for automatic tag list
pushing to a listening machine. The time is specified in seconds. If set to
zero or a negative number the time-based automatic notification is disabled.
When set to a positive number of seconds, the complete tag list will be
pushed out each period.
Changes made with this command will take effect immediately.
Example
Command
Response
>Get NotifyTime
>NotifyTime=30
Command
Response
>Set NotifyTime=30
>OK
G
ET NOTIFYTRIGGER
S
ET NOTIFYTRIGGER
Description: The notify trigger defines under what conditions a message is
pushed out to any listener. Notify commands can be triggered under any of
the following conditions.
Trigger Name Meaning
ON_ADD Push message when new tag is read and added to the
TagList
ON_REMOVE Push message when a tag is removed from the TagList
ON_CHANGE Push message when a tag is either added or removed
from the TagList
ON_EXTERNAL_IO Push message when a read is triggered via the external IO
pins
Changes made with this command will take effect immediately.
Example
Command
Response
>Get NotifyTrigger
>NotifyTrigger= ON_REMOVE
Command
Response
>Set NotifyTrigger=ON_ADD
>OK
NANOSCANNER READER USER GUIDE • DOC # 8101001-000A 45
© 2002 Alien Technology™