Instruction manual

60
9. PTZ Controls
9.1 Navigating PTZ Menus
9.2 Configuring PTZ Settings
Settings for a PTZ camera must be configured before it can be used. Before proceeding,
verify that the PTZ and RS-485 of the DVR are connected properly.
To configure PTZ settings:
1. Enter the PTZ Settings menu by clicking Menu > Settings > PTZ. The PTZ
Settings menu is shown below.
PTZ menus can be navigated through with
either the mouse or the front panel/remote.
For quick access to certain PTZ settings,
right clicking with the mouse in a display
while in PTZ control mode will bring up the
PTZ settings menu. This menu is shown to
the right.
The items that can be found on this menu
include:
• Camera: Select a PTZ camera.
• Call Preset: Call a PTZ preset.
• Call Patrol: Call a PTZ sequence.
• Call Pattern: Call a PTZ pattern.
• Preset Settings: Enter PTZ preset.
• Patrol Settings: Enter PTZ patrol.
• Pattern Settings: Enter PTZ pattern.
• PTZ Menu: Enter PTZ menu.
• PTZ Settings: Enter PTZ settings menu.
Intelligent Security and Fire Ltd