User's Manual

Professional

FM Transceiver

Side Key

【

PF2

】

Function Instruction

Default: Monitor function

1. Monitor function: In standby state, press and hold this key to open the squelch and monitor the

channel. Release the key to Exit.

2. Squelch Off: In standby state, press this key once to monitor, press it again to exit.

3. Press this key to turn on transceiver and hold it for 3 seconds to come into general setting setup.

BASIC OPERATIONS

3. Alarm Off: In the alarm mode, press this key to stop the alarm.

4. Jacklight Switch: In standby, press this key to switch on or off the jacklight.

5. Tone-burst tone transmitting: While transmitting, press and hold this key to send the selected tone-

burst tone.

Switch between VFO and Frequency+Channel Mode

Press

【

】

key to switch between frequency mode (VFO) and Frequency + Channel mode or

Channel+Name Tag mode.

NOTE: When the channel hasn’t been preprogrammed, this operation is unavailable.