User's Manual

Professional
FM Transceiver
54
At this state, the approximate battery voltage is displayed on the LCD.
Please note that the voltage is approximate and Alinco doesn’t guarantee the accuracy.
BACKGROUND OPERATIONS
Resume Factory Default (RESET)
You can make all the settings of transceiver return to the factory default settings when transceiver
cannot work normally because of wrong operation or error setup.
1.Press and hold
【
PF2
】
key while turning on the radio, and keep pressing
【
PF2
】
key for 3 seconds
to enter into the Set Mode operations.
2.Press
【
B
】
/
【
C
】
key to choose the Menu 18 and display “
RESET
”.
3.Press
【
A
】
key then press
【
B
】
key or
【
C
】
key to choose the reset mode.
FACT?:
Resume Factory default. Frequency, signaling tones and function
settings will return to the factory default.
INIT?:
Resume Set mode setting parameters to default. Frequency, signaling
tones and function settings remain unchanged.
4. Press
【
#
】
key to confirm and perform the reset.
NOTE:
Once the reset is performed, previous programming data are gone and can’t recall. Please be sure to
manually write major setting such as frequency and signaling settings used in your group to manually
restore the data after reset.