User's Manual Part 2

Basic Operation

14.The rest capacity of batterry display function

1.When full, it have sections 3 batteries symbol which will be reduced as using.

2.Please pay attetion to using and recharging in advance.

3.Without electricity, it will show LOBR, at the same time you will be prompted

warnings.After several times will be cut off power supply.

13.CALL TONE Function

1.Pressed PTT twice quickly, it will have CALL TONE syllable. you call the other

party;

2.Warning each other to be ready to launch on the phone.

3.There are 5 CALLTONE to be choosed.So you can set different CALL TONE

sounds against each other .

Set the CALL TONE sound method:

1.Press " " key to enter function menu, and select CALL TONE by pressing

" " " " key function; then press " " key again to enter into the function

set, press " " " " key, the choice OF / 1 ~ 5 kinds OF CALL TONE sound;

Press " " key to confirm.

Noted: after set CTCSS/CDCSS function, if don't set the same group, it won't

CALL bell ring TONE.