Information

ERW-8

Connect the mini-USB plug to the back of the EDC-174 charger-stand and an USB port on

the PC. By referring to the page 73 [Set-mode configuration], P.83 Key-assignment and P.88

Remote COM port setting on the manual, select the parameter "Enable". Click on the short-

cut icon of the program. The program window will pop up, then select the COM port

assignment in the tool-bar > COM-port menu. Please select also the model of your X11 from

J (Japanese), E (Europe and world) or T (North America) by checking the circle. An error

message will appear when you start reading/writing the data if the model selection is invalid.

[Operations]

 Before start cloning, PLEASE SAVE THE DATA ALWAYS as a backup. This beta

version is not yet well tested with non-Japanese OS therefore operation may be

unstable.

 To edit memories, please use the Memory tab. Click on the line you wish to edit so

that another editor window pops up. You may also use import/export function so that

you can edit the memory data using common CSV format.

 For the bank tab, you can set banks up to 50 but the total number of memory channels

must always be 1000 in total. Please observe the right bottom column and make it

1000 before quit editing.

 "Title Name" feature in the common setting tab replaces the animated opening image

with up to 16 characters of your preference. Please leave it blank to use original

animated image.

About [FONT] menu on the setting tab : You may create characters or symbols of your

preference using this feature and display them as fonts on X11's screen. Click [FONT] button

to display the editor menu. Click on the square to make your own fonts. One square

corresponds to one dot on the LCD. After the design is completed, save it by clicking the file

menu in the tool-bar. To display the fonts, select the font you like, and assign a number using

the pull-down box at the left. Click OK on the right. In the Title menu on the Common-set or

in the Memory editing menu, there are 8 numeric buttons. These buttons corresponds the

number you registered in the pull-down menu. When you press [1], instead of the character

you created, [ ;1~] is displayed. You may create the fonts as much as you want, but you can

example you assigned a font ";-)" to the number 1 today and wrote " ;-) Hello" in the title.

Next day, you assigned a font [@@] to the number 1 and edited a memory tag. In this case

the memory tag will be all right but the title will become [@@Hello]. Perhaps the best way to

manage these fonts would be that you make the memory data and font data together, keep

them in a same sub-folder, so that when you load the memory file you also load the

corresponding font file.

The remote-control software

[Installation and Uninstallation]

Please uninstall older versions through Add / Remove Programs in Windows Control Panel

BEFORE installing the new version. Click the installation file and follow the instruction. A

short-cut icon will be displayed on the desktop after the installation is completed.

Please be sure to install driver software of ERW-7/8 before start using it.

Please check Windows system menu>device manager to make sure the port assignment of the

cable. [Port (COM and LPT)>USB Serial Port (COM*)]

The most common causes of troubles are COM-PORT setting related or missing the