Information

installation of the driver-software. If error occurs during the operation, just turn off the DJ-
X11, perform a reset (p.101 on the manual) and retry. The com-error of cloning/control
software won't cause hardware troubles to the DJ-X11.
Sorry, please do not contact us asking how to install or use the program, as the interface is
very simple. The updates will be posted here as soon as available.
In case you find a bug, please report to [e-mail] specifying your OS and OS
language. Thank you.
[Preparations]
 Connect the mini-USB plug to the back of the EDC-174 charger-stand and an USB
port on your PC. By referring to the page 73 [Set-mode configuration], P.83 Key-
assignment and P.88 Remote COM port setting on the manual, select the parameter
"Enable". Click on the short-cut icon of the program. The program window will pop
up, then select the COM port assignment in the tool-bar > COM-port menu.
 Press FUNC key then ENT/STEP key to select the step to 50Hz. Other setting causes
malfunction for controlling VFO frequency input. Wrong entry (the freq. that DJ-X11
can't support etc) will be rejected or changed to closest possible frequency.
[Operations] * "Panel operation" allows you to control DJ-X11 using the mouse of your PC
as if you actually press keys or rotate knobs on the receiver.
[Note] "Press-and-hold" key operations are not supported such as pressing MAIN key for a
second to make it single-monitoring mode. To use Monitor/Mute function, select the "hold"
mode in the set-mode (p.87 MONI key activation setting).
* "Tables" operation allows you to directly enter frequencies, select modes, activate
TSQ/DCS decodes etc. Please see below for more details.
* Settings menu:
COM port : Set the assigned COM port here. You should check the COM assignment when
you change the connecting com port of the cables.
Freq. Read Suspend : This program periodically communicates with DJ-X11 to correctly
display the current frequency setting. In order to use receiver software like AIS or ACARS
plotting or recording the receiving signals you should turn this feature off to eliminate pop
noises. You can still use the control software regardless of this setting; this parameter is only a
display-related.
* Help
Displays the version ID of the program.
[Function in Tables operation]
When properly working, the current data such as frequency and modulation mode settings on
MAIN/SUB VFO are automatically displayed.
1: Frequency display
Click on the display to enter the frequency directly through the keyboard of your PC. Press
Enter key of the keyboard to set it to the X11. The new frequency will appear on X11's screen
if the entered frequency is valid. You don't have to enter whole digits such as 0123.45000, but
enough to type 123.45 and press Enter key to set the frequency there. Wrong entry (the freq.
that DJ-X11 can't support etc) will be rejected or changed to closest possible frequency.