Information

2: Changing the MAIN/SUB bands
Click on the MAIN or SUB field to switch the working band.
3: Preset memories
This is the original feature of this program. 10 each channels are available for Main and Sub
bands independently from the DJ-X11's memories to be used only in this program.
[How to use Preset memories]
1: Click on the "Memory" check box.
2: Click on any of P1-P10 button to use. A window pops up to enter the frequency and name
the memory. Click on OK to enter.
3: Press the Preset key to set the frequency stored in advance.
[Note] Invalid data will be rejected and disregarded by the DJ-X11.
4: Output
It switches between Audio, Discriminator (DET) and IQ signal outputs. When the IQ output is
selected, X11 changes to the Main-band receive mode (IQ output is not available on SUB
band). After canceling the IQ output, click on the SUB band field and enter the Sub-band
frequency or use Sub-band preset memory channel to recall the Sub-band receive channel.
Download Information:
Software name
DJ-X11 Clone utility / Control
Download file name
* DJ-X11_CloneUtility_v2.00 (3.9MB)
* DJ-X11_Remote.zip (0.35MB)
Supported model(s)
DJ-X11E / DJ-X11T. All firmware versions
Version
* Clone Utility v2.00 (3.9MB)
* X11rmt.exe 0904 (0.46MB)
System requirements
5 MB or more free hard-disk space; 32 MB or more RAM; built-in
USB or serial port
 Microsoft Windows Vista Home Basic (32-bit version)
 Microsoft Windows Vista Home Premium (32-bit version)
 Microsoft Windows Vista Business (32-bit version)
 Microsoft Windows Vista Enterprise (32-bit version)
 Microsoft Windows Vista Ultimate (32-bit version)
 Microsoft Windows XP Professional
 Microsoft Windows XP Home Edition
 Microsoft Windows 2000 Professional
 Microsoft Windows 7 Home/Professional
Copyright
Alinco,Inc.
Extraction
Zipped file
Reproduction
Not permitted