Technical data

AFSK1201 Seite 12
Cable 62: Multi-Top (LCD-display) with 6-pin mini-DIN-plug
pin 1 (MIC) ---<br>--- pin 2 (?) : Microphone
pin 2 (GND) ---<wh>--- pin 1 (?) : GND
pin 2 (GND) ---<wh>--- 3,5 mm ear-phone plug, outer contact
pin 3 (PTT) ---<yel>--- pin 4 (?) : PTT
pin 4 (SPK) ---<gn>--- 3,5 mm ear-phone plug, inner contact (speaker)
(please compare to the radio manual)
Cable 63: Yaesu with 8-pin audio screw-locking line plug
pin 1 (MIC) ---<br>--- pin 8 (MIC) middle pin
pin 2 (GND) ---<wh>--- pin 7 (GND) near the notch
pin 3 (PTT) ---<yel>--- pin 6 (PTT)
pin 4 (SPK) ---<gn>--- pin 4 (SPKR)
Cable 64: Kenwood with 8-pin audio screw-locking line plug
pin 1 (MIC) ---<br>--- pin 1 (MIC)
pin 2 (GND) ---<wh>--- pin 8 (GND) middle pin
pin 3 (PTT) ---<yel>--- pin 2 (PTT)
pin 4 (SPK) ---<gn>--- pin 6 (SPKR)
Cable 65: Kaiser KA9040FM, 9050FM, KE9015/40 with 4-pin Mic and 3,5 mm SPKR ear-phone jack
pin 1 (MIC) ---<br>--- pin 1 : Modulation
pin 2 (GND) ---<wh>--- pin 2 : GND and 3,5 mm ear-phone jack outer (GND)
pin 3 (PTT) ---<yel>--- pin 4 : TX, PTT
pin 4 (SPK) ---<gn>--- 3,5 mm ear -phone jack inner (SPK)
Cable 66: Stabo AE6080, xm6012, twinstar with 8-pin Western-plug
pin 1 (MIC) ---<br>--- contact 5 : Microphone
pin 2 (GND) ---<wh>--- contact 4 : GND
pin 3 (PTT) ---<yel>--- contact 6 : PTT
pin 4 (SPK) ---<gn>--- contact 7 : Audio, NF
pin 5 (+12V) ---<rt>--- contact 3 : + 12 V
Cable 67: stabo SH 8000 with 2,5 mm ear-phone (speaker) and 3,5 mm mikroph. stereo jack
pin 1 (MIC) ---<br>--- 3,5 mm stereo ear-phone jack middle contact : Microphone
pin 2 (GND) ---<wh>--- 3,5 mm stereo ear-phone jack outer contact : GND
pin 2 (GND) ---<wh>--- 2,5 mm ear-phone jack, outer contact : GND
pin 3 (PTT) ---<yel>--- 3,5 mm stereo ear-phone jack, inner contact : PTT
pin 4 (SPK) ---<gn>--- 2,5 mm ear-phone jack, inner contact (speaker)
Cable 68: Conrad C-mobil with 3,5 mm speaker jack and 8-pin DIN-plug (50cm distance between sockets)
pin 1 (MIC) ---<br>--- pin 8: Microphone
pin 2 (GND) ---<wh>--- pin 1: GND
pin 3 (PTT) ---<yel>--- pin 7: PTT
pin 2 (GND) ---<wh>--- 3,5 mm ear-phone jack outer contact : GND
pin 4 (SPK) ---<gn>--- 3,5 mm ear-phone jack inner contact (speaker)
Cable 69: Alan 48 plus D80 with 6--pin audio screw-locking line plug and
3,5 mm ear-phone jack (see cable 53)
pin 1 (MIC) ---<br>--- pin 1 : Modulation
pin 2 (GND) ---<wh>--- pin 5 : GND and 3,5 mm ear-phone jack outer contact (GND)
pin 3 (PTT) ---<yel>--- pin 3 : TX, PTT
pin 4 (SPK) ---<gn>--- 3,5 mm ear-phone jack inner contact (speaker)
Cable 70: Conrad CV2000, DNT Formel 1 etc. with 5-pin DIN-plug
pin 1 (MIC) ---<br>--- pin 4 : Microphone
pin 2 (GND) ---<wh>--- pin 2 : GND
pin 3 (PTT) ---<yel>--- pin 3 : PTT
pin 4 (SPK) ---<gn>--- pin 5 : Audio, SPKR
Cable 71: BOS radios (police, fire brigade, ambulance) FuG (e.g. FuG 8b-1), KF (e.g. KF802) etc. with
10-pin NF 'NATO-headset' connector (UG77/U). PTT is switched to +12 volt. A PNP-transistor and 2x 10 kΩ
are required. These parts can be mounted inside the UG-plug.
pin 1 (MIC) ---<br>--- contact F (microphone A)
pin 2 (GND) ---<wh>--- contact H (mikrophone B, ground) and contact D (ground speaker)
pin 4 (SPK) ---<gn>--- contact E (audio speaker)
pin 3 (PTT) ---<yel>--- R1 pin A
connect R2 pin A with emitter and contact B (12 V). Connect collector with contact C (PTT);
connect R1 pin B with R2 pin B and basis of transistor.