Instruction manual

3.Names and Operations of Parts
3
21
key
Without pressing the FUNC key.
Inputs 1.
Inputs 2.
Inputs 3.
Inputs 4.
Inputs 5.
Inputs 6.
Inputs 7.
Inputs 8.
Inputs 9.
Inputs 0.
Batttery type setting (page 44)
Reverse operation (page 27, 42)
Switches between the VFO and
Memory mode (page 24).
Start/Stop scanning (page 33).
Access the Call channel (page 31).
Switches between the VHF and UHF
(page 24).
Quick-write memory (page 29)
SQL adjustment (page 23).
Audio level adjustment (page 23).
While appears after the FUNC key is pressed.
Channel step setting (page 26).
Offset frequency setting (page 27).
Alert Function (page 43).
Tone Encode / Tone Squelch setting
(page 36).
Hi/Mid/Low power setting (page 32).
VOX setting (page 43).
DCS (digital code squelch) setting (page 37).
Auto dialer operation (page 40).
Auto dialer memory setting (page 40).
Repeater-Access function setting (page 42).
Memory programming (page 28).
Key / Frequency lock setting (page 34).
Memory channel skip setting (page 34).
Naming memory channels setting (page 35).
N/A
N/A
* The numeric keys can be used for direct VFO frequency input within the product's
operating range. DTMF tones are generated by pressing the keys during transmissions.
Keypad
3.2