User Manual

22
4. Names and Functions of Parts
4
4.
Names and Functions of Parts
4-1 Names and Functions of Receiver Parts
4-1-1 Top/Front panel
(1)(2)(3)(4)
(5)
(6)
(8)
(9)
(10)
(7)
No. Item Description
(1) Dial Rotate the dial to change frequency. Press the dial
once to adjust the volume level. Pressing this dial
while the icon is displayed switches the receiver to
the Set mode.
(2) RX lamp This lamp illuminates in green while the squelch is
open. The lamp illuminates in red while the receiver is
charging.
(3) Earphone jack Used to connect an earphone or the optional remote
controller.
(4) SMA
antenna connector
Used to install the included whip antenna.
(5) LCD The status of the receiver is displayed. Refer to "LCD
Display" for details.
(6) Speaker A low-prole, built-in speaker is provided.
(7) Key pad Use these keys to directly input a frequency or to
directly jump to the Set mode. It is also possible to
fully cover the keys for simple operation.
(8) SCAN key Used for scanning and Tone Squelch operations.
(9) V/P/M key Used to switch the operating mode.
(10) BAND key Used to switch the band, preset, or memory bank.