Installation manual

SELECT A MANUFACTURER
NOTE: Please read the "Important Notes" above BEFORE you select your jumper settings. This will save time and may help
prevent you from making a mistake that could possibly damage the SignaLink or your radio. Note that the SignaLink USB does
NOT use the PWR jumper wire, so you can disregard this jumper during installation. All other jumper settings are the same.
ADI
8-Pin Round Mic Connector - TGR-SL-CAB8R
Radio Models
Pin-out
Notes
JP-1
AR-146
AR-147
AR-446
Pin 1 - Mic Input
Pin 2 - PTT
Pin 3 - N/C
Pin 4 - N/C
Pin 5 - N/C
Pin 6 - Speaker**
Pin 7 - N/C
Pin 8 - GND
** Speaker audio is available on some models. Check
your radio manual for availability of these signals and
add the appropriate jumpers.
ALINCO
8-Pin Round Mic Connector - TGR-SL-CAB8R
Radio Models
Pin-out
Notes
JP-1
ALD-24T
ALR-22T/22HT/72T
DR-110T/112T
DR-130T/135E/135T
DR-150/235T
DR-430T/435E/435T
DR-510T/570T
DR-590T/592T/599T
DR-600T/610E/610T
DR-620E/620T
DX-70T/70TH/70EH
DX-77
DX-SR8T/E
Pin 1 - Mic Input
Pin 2 - PTT
Pin 3 - N/C
Pin 4 - N/C
Pin 5 - N/C
Pin 6 - N/C**
Pin 7 - GND
Pin 8 - GND
** Speaker audio is available on some models. Check
your radio manual for availability of these signals and
add the appropriate jumpers.
ALINCO
RJ-45 Mic Connector - TGR-SL-CABRJ4
Radio Models
Pin-out
Notes
JP-1
DR-605E/605T
Pin 1 - N/C
Pin 2 - N/C
Pin 3 - N/C
Pin 4 - PTT
Pin 5 - Mic GND
Pin 6 - Mic Input
Pin 7 - GND
Pin 8 - N/C
Speaker audio is available on some models. Check
your radio manual for availability of these signals
and add the appropriate jumpers.
AZDEN
8-Pin Round Mic Connector - TGR-SL-CAB8R
Radio Models
Pin-out
Notes
JP-1
PCS-5000
PCS-6000
PCS-7000
Pin 1 - Mic Input
Pin 2 - GND
Pin 3 - N/C
Pin 4 - N/C
Pin 5 - N/C
Pin 6 - N/C
Pin 7 - PTT
Pin 8 - N/C
Speaker audio is available on some models. Check your
radio manual for availability of these signals and add the
appropriate jumpers.