Instruction Manual

15
2.
Press
P3
/
P4
key to choose No.01 menu, LCD displays "
STP--
125
".
3.
Press / to select the desired frequency channel step.
Available steps in KHz are: 2.5(shown as 2K5), 5, 6.25(62), 8.33(83),
10, 12.5(125), 20, 25, 30 and 50.
4.
Press any key except
PWR
,
P3
,
P4
, , key to exit.
1.
Press and hold
FUNC
key for over 2
seconds to enter setting menu.
1.
Press and hold
FUNC
key for over 2 seconds to enter the FUNCTION
MENU SETUP.
2.
Press
P3
or
P4
to select the desired menu.
P3
key to forward
and
P4
key to backward menus.
3.
Press / to select the desired parameter.
4.
Press any key except
PWR
,
P3
,
P4
, , key to exit.
Only in VFO mode, this function is valid.
7
FUNCTION MENU SETUP
Frequency Step Setup
How to use FUNCTION MENU
01 STP menu won't appear when the radio is in memory mode.
Tone code settings should be performed in advance to Signaling
operations by PC programming. Manual code setting is not available.
RECEIVING DTMF, DTMF ANI, 2TONE OR 5TONE SIGNALING
DTMF/5Tone/2Tone signalling are used for selective-calling. DTMF and
5Tone signalling can be applied for other advanced features such as
ANI, PTT ID, group call, remotely stun, remotely kill, revive,...etc.
1.
Press and hold
FUNC
key for over 2 seconds to enter into setting
menu.
2.
Press
P3
/
P4
to choose No. 2 menu, LCD displays "
T-OFF
" .
3.
Press / to select the desired setup.

"DTMF”: The channel will be mute by a DTMF signal. The speaker
won’t sound until receiving a correspondent DTMF signal. Hold
[
PTT
] then press [
UP
] directly to
transmit the pre-stored DTMF tones.
Menu No. LCD Display
Å
Default
01 STP (Channel Step) 5K
02 T (DTMF,2 TONE, 5 TONE Of RX) OFF
03 2TONE (TX) 00
04 5TONE (TX)
00
05 DTMF (TX) 01
06 SPK (Signal Combination) SQ
07 POWER HIGH
08 BAND 20K
09 TX ON
10 LOCK(Busy Channel Lock Out) OFF
11 Editting Channel Name -
12 REV (Reverse TX/RX) OFF
13 TALK (Talk Around) OFF
14 D (DTMF Self ID Enquiry) 001
15 F (5 TONE Self ID Enquiry) 12345
16 BEEP (Beep Sound) ON
17 TOT (Time Out Timer) 3 Minutes
18 APO (Auto Power Off) OFF
19 SPD (DTMF Transmitting Time) 50
20 COL (Display Color) ORG
21 SCAN T0
22 TB (Tone-Bust Tones) 1750
23 DSP (Display Mode Setup) FR
24 CODE OFF
25 BOOK (Address List) -
26 RESTORE -
Some of features can be also operated through the microphone keys.
It is recommended to read Chapter 8 (p.23) together with this chapter.