Instruction Manual

26
9
1.
An optional EDS-29 cloning cable and PC programming is necessary to activate cloning function to the master unit. Make a master unit by setting
and programming it as desired. Turn off both units. Connect the cable between the DATA jacks on both units.
2.
Master unit: Press programmed CLONE function key (Program the Key by PC) or other way that press and hold Power(On)+ FUNC+ P2 key at the
same time to enter into cloning mode. LCD displays "
CLONE
".
Cable Clone
OPTIONAL ACCESSORIES
This function is useful to clone many units in enviornment where PC is not available. This feature is popular to commercial land mobiles.
3.
Press master unit's [
FUNC
] key, LCD displays "
CLONEXX
". Slave unit displays "
CLONEXXX
". When the cloning is successfully nished, the slave
unit will restart. Turn off the power, disconnect the cable and repeat step 3 operations to clone the next slave unit.
This feature clones the programmed data and parameters in the master unit to slave units.
- EDS-29 Clone cable
- ERW-12 PC cable
- EMS-74 Microphone (spare)
10