User`s manual
AlineA Ltd. Users Manual
Page 10 of 14 200SS GSM CallShop Desktop Phone
Press “0” to cancel the operation and return to short message lists. Press “1” to
delete confirm
the operation and return to short message lists.
14. Edit and send short message
Users can edit a message that is not longer than 160 English characters. Short
message center must be set up for sending or receiving short message.
1:READ MESSAGE 00/02 2:WRITE MESSAGES 3:CALL REGISTER j
a) Enter menu “2 WRITE MESSAGE” to enter the edit of short message. When the
phone enter the edit of short message, the LCD displays as
ABC
_
b) Input the contents of the short message through keyboard (Details refer to
“Notes: the edit of short message” on page 15). On the completion of edit, pres
“OK”, the LCD will display as follows:
SEND TO 12345678
c) Input the telephone number of the receiver. Press “OK”, the LCD displays
as:
SENDYESOK N0BACK
Press “OK” to send this message; press “Back” to return to the edit of short
message.
d) If the short message is sent successfully, the LCD displays “DONE” and
return to the up-level menu, otherwise the LCD displays “FAILED” and then returns
to the edit of short message.
DONE
FAILED
Notes: The edit of short message.
a) During the edit of short message, the cursor is flashing. Press “Back” to
return to cancel the edit and return to the up-level menu.
b) Press “123/ABC”to switch among three inputting modes: capital letter
(ABC), small letter (abc) and digit (123).
c) Punctuations inputting: In letter inputting mode (capital letter and small
letter), press “1”continuously, the optional punctuations will be displayed in turn.(
Pressing one time display the first punctuation. Pressing twice displays the second
one. The later punctuations can be input in the same way.), Select the punctuation
you want to input.
d) Press respectively“*<” and “#>” to move cursor to right and left. Press “Up”
and “Down” to move cursor to the up line and the down line.
e) Press “Cancel” to delete the character before the cursor
ABC HELLO,ERIC!
Press key “1” to select punctuations Capital letter
HELLO,ERIC!