User's Manual

ALXC2X USER MANUAL
Alinket Proprietary & Confidential Information
E-mail: [e-mail] Website: http://www.alinket.com
16
2. Select “WiFi ON” in part 1, then click button “set”. If command is successful, the response is
“Command Success”.
3. Select “WiFi Join” in part 1, fill in the blank in part 2, then click “set”. If command is successful,
information will displayed in the console.
Figure 11 Configuration about Join AP
4. Select “IP Configuration”, enable “DHCP Status”, “set” into module. Then click “Get” to obtain a
new IP address.
3.4.2 TCP Mode
3.4.2.1 Module Works on Client
1. Open COM port and choice right baud rate form menu->setting.
Figure 12 Open COM Port
2. Choice “WiFi ON” in part 1, then click button “set”. If “WiFi ON” is ok, the response is
“Command Success”.
3. Choice “WiFi Join” in part 1, fill in the blank in part 2, then click “set”. If join is ok, success
information will read from part 4.