User's Manual

ALXC2X USER MANUAL
Alinket Proprietary & Confidential Information
E-mail: [e-mail] Website: http://www.alinket.com
18
7. Go back to ACM tool, choice “Connect TCP Server”, and fill in right information. After above
action, click “set” to connect TCP server.
Figure 16 Connect to TCP Server
8. If connection is ok, you can send and receive message between ALXC2X and TCP server.
3.4.2.2 Module Works on Server
1. Repeat step1 ~4 in 2.4.2 chapter.
2. Choice “Create TCP Server”, then fill the table in part 2, after that click “Set” button.
3. Open Alinket Socket Runner, set client like below:
Figure 17 Add TCP Client
4. Click “OK” button.