User's Manual

ALXC2X USER MANUAL
Alinket Proprietary & Confidential Information
E-mail: [e-mail] Website: http://www.alinket.com
22
4. WiFi SSID is the name of the AP that the computer attached to.
5. Server URL is the server IP and port number.
6. Stop/Start button will launch the “flash link” function.
7. When configuration is finished, click “Start” button, if flash link is successful, the module will
automatically configured.
8. After the module connects to the server successfully, message can be exchanged between the
computer and the module as shown in below figure.
Figure 23 Connect to Server Success
4.2.2 UDP mode
1. Set up a client on PC, configure the UDP setting.
2. Repeat step 2~7 in chapter 4.2. But server URL in step 3 should be udp://XXX.XXX.X.X:port
number.