User`s guide

PC*MILER-AS400 User’s Guide 17
Click Next and in the next screen select a folder to install to, or use the
default folder (PCMILER28). Click Next again when ready.
During the installation you will be prompted to enter the name of the
library for data queues. The default values are ALKWIN (without
PC*MILER|Tolls) and ALKTLL (with PC*MILER|Tolls). NOTE: ICC
users need to coordinate with Innovative to enter the proper ICC
Work Library for their release of the ICC software. Upgrading ICC
users can read the correct library by running the alkwin/config
command from an AS400 command line.
If you purchased the PC*MILER|Tolls component you will get the following
prompt:
Answering ‘Yes’ will turn off the Tolls component and install an ICC-
compatible version of the PC Mileage Server.
Answering ‘No’ will install the PC*MILER|Tolls version of the PC Mileage
Server. (ICC users and users of third-party or custom in-house
transportation software should click ‘Yes’ and refer to Appendix H and
Chapter 7 for instructions about using PC*MILER|Tolls with their
software.)