User`s guide

PC*MILER-AS400 User’s Guide 73
E = Explosive Restriction
F=Flammable
I = Inhalant Restriction
R = Radioactive Restriction
RESP-SEQ 4 Sequence for multiple responses (Note: Border & Ferry
settings not echoed in CP response.)
RESP-ERR 2 Error Code
E1 First state not found
E2 First city not found
E3 Second state not found
E4 Second city not found
E5 Unable to resequence
E6 Unable to calculate route
E9 Disconnected Highway Network
More Options 29 -38 (Echoed Back From Request)
RESP-MVS 3 Pos 1-3) MVS Version Only*
RESP-TollCost 1 Pos 4) Tolls Cost
RESP-FILL 6 Post 5-10) Not Used
RESP-CIT1 39 39 bytes
All stop information including
Zip and\or city\state and\or county and\or
Street address
or
If there is error, the error code
RESP-CIT2 39 39 bytes
All stop information including
Zip and\or city\state and\or county and\or
Street address
RESP-MILE 5 Total miles returned or 3-digit error code
RESP-HOUR 4 Total time in hours (0031) = 3.1 hours
RESP-COST 7 Total cost for city pair (0052295) = 522.95
RESP-TollCost 7 Tolls Cost for city pair (0007920) = $79.20
FILL127 127 Blanks
Total 267
* “MVS” is the PC*MILER Multi Version Switch product, an optional product that allows for
connection to multiple versions of PC*MILER.
7.2.3 State Miles (SM) Request and Response
For PC*MILER|Tolls, the SM Request layouts were increased by 10 to
hold a new set of Trip Parameters. The SR Response Layouts were
increased by these 10 new trip parameters plus 70 characters (10 sets of
7) to hold Tolls Cost data. Output Data Queues increased from 1024 to
1048.
1. (Request) The following are field parameters for a state miles request.
The purpose of this request is to attain the state-by-state mileage
information associated with a trip.