Navigator User’s Guide
Welcome Thank you for choosing PC*MILER Navigator. This guide will tell you everything you need to know about using your PC*MILER Navigator. It will explain the basics, share some tips for operations and show you how to customize your unit. FOR YOUR SAFETY Do not operate product while driving! It is your sole responsibility to use the product in a safe and responsible manner.
Getting Started In the Box: • PC*MILER Navigator • QuickStart Guide • User Manual • Windshield Mounting System (adjustable arm with suction cup & navigator cradle) • Truck Charger • Mini USB Cable Quick Start Guide and User Manual PC*MILER Navigator Mini USB Cable Windshield Mount Truck Charger The CoPilot Truck GPS navigation software with street-level maps of United States and Canada comes pre-installed on your PC*MILER Navigator device. No additional installation necessary.
Identification SD Logo is a trademark. Mounting your PC*MILER Navigator Your PC*MILER Navigator can easily be secured to your windshield for optimal viewing while driving.
• Navigator cradle NOTE: Stylus is located on the back of the Navigator cradle Assembling the Windshield Mount • Select a location for the mount on the windshield that does not obstruct the driver’s view or interfere with operation of the vehicle. • Clean and dry this area to remove any grease or dirt. • Place suction cup on the windshield in the desired location; push the locking lever towards the base of the mount. The mount should stick to the surface.
• To remove the PC*MILER Navigator from the mount, gently push back the tab on the top of the cradle until the units is released. Detaching the Mount • Pull the locking lever away from the base of the mount. • Grasp the pull tab of the suction cup and gently pull away from the windshield to break suction.
Connecting the Mini USB Cable • Insert the USB end of the cable into an available USB port on your computer • Insert the mini-USB end of the cable into the mini-USB port on the Navigator Preparing the PC*MILER Navigator Switching On and Off • Switch on the PC*MILER Navigator by holding down the power button for 4 seconds. • Switch off the PC*MILER Navigator by holding down the power button until unit displays ‘Powering Off’.
1. Select Language o Tap the desired language from the on-screen text. 2. Select a Voice o Tap the desired voice. NOTE: To hear a sample of the voice you have selected, tap Test. Voices with an * will include street names when providing directions. (See page 40 for additional language and voice options.) o Once selected, tap 3. Set Units of Measure o Choose desired units of measure by tapping between English/Imperial and Metric. 4.
NOTE: Tapping Decline will take you out of the navigation software. To use the PC*MILER Navigator, the user must agree to and accept the End User License Agreement. 6. How to Scroll o Read the on-screen how to scroll directions and tap 7. Routing – Dimensions o Personalized routing dimensions are: Max Height, Max Width, Trailer Length, Total Weight and Total Weight/ Axle. o To change personalized routing dimensions, tap the routing dimension to be changed > enter dimension > tap Save.
9. Routing - Hazmat o Select personalized hazmat routing options and tap 10. Routing - Tolls o Select personalized toll preferences and tap 11. Routing - More o Select personalized routing preferences such as Scenic Route, National Network, 53ft Trailer, Override Restrictions, and International Borders Open (see page 54 for a description), then tap 12. Routing Type o Select Practical or Shortest for your routing type.
14. Warning o Read warning and tap Accept. Tip: GPS signal will be limited or blocked inside buildings, tunnels, or parking garages. To work effectively the PC*MILER Navigator should be mounted in the supplied windshield cradle with a clear line of sight to the sky.
On Screen Information The PC*MILER Navigator will guide you to your destination with spoken instructions as well as clear on-screen instructions. Your screen will look similar to the one below. By default your current location is displayed at the bottom of the map. See the Guidance section on page 47 to learn how to modify the information displayed.
Destination The PC*MILER Navigator uses GPS satellites to calculate your exact position so you do not need to enter your current location. Simply enter your destination and the PC*MILER Navigator will provide detailed dock-to-dock voice and on-screen instructions to get you there. Address • Tap Menu > Destination > Address. • Enter the city/town name or zip code of your destination. • Scroll through the list by gently pressing the stylus to the list and do not remove pressure.
• Tap Menu > Destination > Points of Interest. • Select the desired search location: Nearby, In different city, or On my route: Nearby o Tap the desired category. (If the category you are looking for does not appear, tap More Categories on the lower right screen to display more options. Or, search by POI name by tapping the lower left Search by Name tab). For example tap Truck Services > desired truck service from list, such as Highway Exit, Truck Services, Truck Stops, or Weigh Stations.
POI, tap the POI to select it. You will get more precise results and smoother scrolling by using the stylus. o Tap desired category. If the category you are looking for does not appear, tap More Categories on the lower right screen to display more options. Or, search by POI name by tapping the lower left Search by Name button. For example tap Truck Services > desired truck service from list, such as Highway Exit, Truck Services, Truck Stops, or Weigh Station. o Scroll through the list of POIs.
and down to scroll the list. Once you have found the desired POI, tap the POI to select it. You will get more precise results and smoother scrolling by using the stylus. o A details page will be displayed with POI address and map. Tap GO. o Confirm destination by tapping GO. Pick on Map You can also select a destination from the map. o Tap Menu > Destination > Pick on Map. A map of the area around your current location will be displayed.
Coordinates If you know the latitude and longitude of your destination you can enter them directly. o Select Menu > Destination > Coordinates. o The latitude and longitude can be entered in one of the following formats: Degrees Minutes Seconds, Decimal Degrees or Decimal Minutes. o Enter a latitude and longitude in the selected format. Tap The PC*MILER Navigator will take a few moments to find the point. When the point has been located, a map will appear with the location pinpointed by a red flag.
Home • Tap Menu > My Places > Home. • Enter the city/town name or zip code of your home location. • Scroll through the list by gently pressing the stylus to the list and do not remove pressure. Then move the stylus up and down to scroll the list. You will get the best results and smoother scrolling by using the stylus, although you can use your finger as well. • Do not enter house/building number; you will enter this on the next step. • Enter the first three or four letters of the street name.
• Enter the house/building number. Select the auto-filled address to continue. • Confirm destination by tapping GO. Recent • Tap Menu > My Places > Recent. • Scroll through the list and tap the desired recent location. • Confirm destination by tapping GO. Favorites • Tap Menu > My Places > Favorite. • Tap • Repeat address steps from destination section on page 13. Truck Routing • Tap Menu > Truck > Routing. 1.
• Repeat this procedure until all personalized routing dimensions are entered, and then tap 3. Custom Routing Type WARNING: Changing these values will change how CoPilot Truck calculates your ETA as well as how it determines the optimal route. 4. Routing - Hazmat o Select personalized hazmat routing options then tap 5. Routing - Tolls o Select personalized toll preferences then tap 6.
8. Save Profile (Optional) o This step is OPTIONAL. To save the profile, enter a name and tap . To skip, just tap without entering a name. Routing Profiles • Tap on Menu > Truck > Routing Profiles. • Tap New to create new routing profile. • Tap • Tap Edit to change saved routing profiles. • Tap Delete to remove saved routing profiles. to scroll through saved routing profiles.
Settings To enable state mileage logging and to delete existing logs: • Tap on Menu > Truck > Settings. o Select Enable State Mileage Logging or Delete Existing Logs WARNING: You will not be prompted to confirm when deleting state mileage logs. Deleted state mileage logs cannot be retrieved. Quick Stop The Quick Stop function helps you easily locate a nearby truck service, gas station, restaurant, or hotel.
Scroll through the list by gently pressing the stylus to the list and do not remove pressure. Then move the stylus up and down to scroll the list. You will get the best results and smoother scrolling by using the stylus, although you can use your finger as well. • Tap Show Map to display all nearby facilities on a map. To return to the facilities list, select Show List. • Tap Search by Name to type the name of a facility and select the one you want when it appears in the list.
End Detour If you are on a detour route and would like to return to the original trip. • Tap Menu > Detour > End Detour. Avoid Roads • Tap Menu > Detour > Avoid Roads. An itinerary of your trip will appear. Tap on the road you would like to avoid. PC*MILER Navigator will take a few moments to plan an alternate route avoiding the selected road. It will display any change in distance and/or ETA of the new route as well as a map of the new route.
• Tap Menu > Detour > Clear Avoided Roads. Plan or Edit Trip Entering Multiple Destinations The PC*MILER Navigator allows you to plan a trip with up to 50 destinations in one itinerary. • Tap Menu > • Tap Add Stop then tap desired category listed, for example Address. • Add the first address in the same way as detailed on page 13. • Repeat these steps to add additional destinations. > Plan or Edit Trip.
• Tap the address you wish to move. A pop-up menu will appear containing a list of options: Set As Stop, Show on Map, Add to Favorites, Send This Location and the following Move to Top Move to Bottom Move Up Delete Move Down • Tap the desired option. The selected stop will move to its new position in the trip list. Setting Waypoints PC*MILER Navigator can route you through a certain point without considering it as a stop.
• The address will appear on the trip list as a stop, with a flag icon next to it. • Tap the address and a pop-up menu will appear containing a list of options. Tap Set as Waypoint. The address will now be listed as a Waypoint, with an arrow icon rather than a stop to indicate that it is a Waypoint • To change a Waypoint back to a Stop, tap the address and select Set as Stop from the pop-up menu.
Save Trip When you have finished entering all your destinations, you can save your trip to access at a later date, rather than start driving right away. • Tap Options > Save. • Enter a name for the trip you are saving. Tap OK and your trip will be saved. To Load a Saved Trip • Tap Options > Load. • Tap the trip that you would like to load from the list then tap Open > GO. To Delete Current Planned Trip • Tap Options > Clear. You will be asked to confirm this selection.
Return Trip Once you have completed your journey, use the PC*MILER Navigator to guide you for your return. • Menu > > Plan or Edit Trip > Add Stop > Return Trip. • Select Routing Type by tapping Practical or Shortest and select toll road preferences by using the up and down arrows and tap OK. NOTE: If you do not want to choose the routing type each time, check the box next to Don’t show this message again. • A route preview will be displayed. Tap Go.
NOTE: Your start point and final destination will not be altered. However, if you want the final destination to be included in the optimization, select Options > Take Breaks > check Optimize Final Destination. Estimated Fuel Costs The PC*MILER Navigator can be configured to estimate fuel costs for a trip. • Tap Options > Fuel Cost > check Show Estimated Fuel Cost. • Enter the average miles per gallon (average MPG) for your truck.
• Tap Menu > tap the > Driving Views to choose from all six views or (driving views shortcut button) to quickly access four of the six views. 3D View The 3D view displays your current position, next turn and surrounding roads using a bird’s eye view. 2D View The 2D view displays your current position as if you were directly overhead. You may use this view to see more of your surrounding area than with the 3D view.
Driver Safety The Driver Safety view displays a turn instruction arrow with concise next turn instructions in large type. In driver safety mode, a map is only displayed as you approach a turn or are traveling below 10 mph. We recommend you choose Driver Safety, Itinerary The Itinerary view shows each direction and turn in a written list, including distances.
The 2D Next Turn The 2D Next Turn view displays your current location and auto zooms into the next turn on a 2D map. 2D Destination The 2D Destination view shows your route from your current position to your destination.
Day Map/Night Map Lets you choose between a regular map for daytime driving and a map with a dark background that reduces glare for easier nighttime viewing. NOTE: Overrides automatic day/night mode. If you choose Day Map or Night Map from the Driving Views menu, please see the Day/Night Mode section on Page 41 to turn automatic switching back on. Settings PC*MILER Navigator can be customized to meet your individual needs and style. Routing You can set up your routing preferences to best suit you.
• Confirm the custom routing type numbers and tap • Tap personalized hazmat routing options and tap • Tap personalized toll preferences and tap • Select personalized routing preferences such as Scenic Route, National Network, 53ft Trailer, Override Restrictions, and International Borders Open then tap • Select Practical or Shortest routing type and tap • Save profile - This step is OPTIONAL - To save profile enter a profile name and tap . Or, skip step and tap to continue.
PC*MILER Navigator will automatically switch between the day and night map styles you have selected when it starts to get light or dark outside. NOTE: If you have chosen Day Map or Night Map from the Driving Views menu, please see the Day/Night Mode section on Page 41 to turn automatic switching back on.
Sound To adjust the sounds of the PC*MILER Navigator: • Tap Menu > • Increase and decrease the volume using the • Check box to Mute sound. • Un-check the Button Click Sounds box to turn off click sound when you touch the screen. • You will hear “Welcome to CoPilot Truck” greeting when you launch your PC*MILER Navigator. Un-check Say Welcome to CoPilot Truck to stop the greeting. • Tap OK to apply the settings and return to the Settings menu. > Settings > Sound. and arrows.
The GPS Status screen shows detailed information regarding the GPS fix and signal strength which your PC*MILER Navigator uses for guidance. From this screen you can see your current latitude or longitude position in decimal degree format, the UTC time and date, your speed and your elevation. NOTE: Your GPS signal will be limited or blocked when the receiver is inside buildings, tunnels, or garages. To work effectively the GPS receiver needs to have a clear line of sight to the sky.
DO NOT USE the GPS Setup menu without direction from Technical Support. The PC*MILER Navigator is ready out of the box and does not require GPS setup. Changing options in GPS Setup without direction from Technical Support may compromise the PC*MILER Navigator’s ability to receive GPS signals. POI Display You may choose which POIs to display on the map and how you would like them displayed. • Tap Menu > • Tap box to choose to show POIs Always, Never, or When Stopped.
• Tap OK to apply the settings and return to the Settings menu. ClearTurn™ CoPilot ClearTurn™ provides a virtual view at complex interchanges and freeway exits. The real sign post information and visual instructions displayed on the road highlight the turn and lane you need. ClearTurn™ is only available in 3D driving view. • Tap Menu > • Check the Display ClearTurn Near Exits box to enable ClearTurn.™ • Use the > Settings > > ClearTurn™.
• Tap the desired voice. Voices with an * will read street names when providing spoken directions. Tap OK. • Tap OK to apply the settings and return to the Settings menu. Day/Night Mode Choosing Day or Night Mode will force your PC*MILER Navigator to use the Day or Night map style you selected (see page 34). Selecting Automatic will allow your PC*MILER Navigator to automatically switch between Day and Night map styles at the appropriate time of day. • Tap Menu > > Settings > > Day/Night Mode.
Info Bar Once you’ve planned a journey and selected GO, the PC*MILER Navigator will display a driving view with useful information about your journey in the Info Bar at the base of the screen. You can decide how the information bar should be displayed and select what information is shown. • Tap Menu > > Settings > > > Info Bar. o Single Display - Shows only one of the information options, for example your estimated time of arrival at a destination.
• Tap OK to apply the settings and return to the Settings menu. Themes PC*MILER Navigator is set to a Default theme and cannot be edited. Time Zone • Choose desired time zone by scrolling through the list, then tap OK. Play Demo You can watch a demonstration of how PC*MILER Navigator will guide you on your journey. • Tap Menu > • Tap the > Settings > > > Play Demo. > icon on the map to open a panel of buttons that let you control the demo or track playback.
• Tap • Tap to close the demo or track. GPS Tracks to play back a previously completed trip. o Select the trip from the Track Playback list. o Tap Play to start playback. About CoPilot To access the version and data number of your CoPilot Truck software: • Tap Menu > > Settings > > > > About CoPilot. Show More Settings The first time you start the PC*MILER Navigator, the settings for some of the more advanced features will be hidden. To view the hidden settings: • Tap Menu > Settings.
The following additional settings will now be displayed: POI Alerts Manage POIs Guidance Speech Routing Profiles GPS Track Playback Data Region Licensing • To hide additional settings tap Menu > > > > > Settings > > > Show Fewer Settings. POI Alerts This option is only visible when Show More Settings is selected from the Settings menu. You can choose which POI categories should be displayed on screen and set the distance at which you would like to be informed about them.
• Select whether to show POIs that are On Route or Near Route. Manage POIs This option is only visible when Show More Settings is selected from the Settings menu. The PC*MILER Navigator lets you add new POIs and create new POI categories. To add your own POIs to existing POI categories or create your own personal categories: • Tap Menu > • Choose either Edit POIs or Edit POI Sets. > Settings > > Manage POIs. Edit POIs o Tap Add button.
Enter a name for the place you are saving and tap Continue. To Create a New Type: Tap New Type button Follow steps for creating new category above. Edit POI Sets This feature allows you to manage and edit POI data sets either created by yourself or purchased and downloaded to PC*MILER Navigator through CoPilot Central o Select the data list that you want to adapt and press the Edit button. You can edit a specific record or add another record following the same steps outlined in Edit POIs.
• Walking Mode - When you are using the PC*MILER Navigator while walking, check Display Breadcrumb to show a dotted line between your start and end destinations to help you navigate. • Tap OK to apply the settings and return to the Settings menu. Speech This option is only visible when Show More Settings is selected from the Settings menu. The PC*MILER Navigator provides help by speaking prompts such as “enter city or zip code.” Text-to-Speech help is enabled by default.
Tip: You may also use the Menu > Truck > Routing Profiles button to access this feature GPS Track Playback This option is only visible when Show More Settings is selected from the Settings menu. The PC*MILER Navigator automatically records your journeys as GPS Track files. To playback a previously completed journey: • Tap Menu > > Settings > > > > > GPS Track Playback. • Select a track from the list by tapping on it then tap PLAY. See page 43 - 44 to demo playback instructions.
• Tap Menu > > Settings > > > > > Data Region. • Tap Data Region. • Tap OK to apply the settings and return to the Settings menu. Restore Default Settings To restore your PC*MILER Navigator to its original factory settings. • Tap Menu > • Tap OK on the Reset all settings? pop up menu > Settings > Restore Default Settings. All your settings will be reset and the navigation software will close. You will be returned to the PC*MILER Navigator’s main menu.
Save Current Location You can save your current GPS location as a destination so you can enter it quickly next time. The following are examples of situations when the Save Current Location would be useful: - When you find a mechanic you like and trust while on the road To identify areas of heavy construction for future avoidance • Tap Menu > • Enter a name for the location you are saving and tap OK. > Save Current Location. The location will be saved in your Favorites list.
Tips & Tricks PC*MILER Navigator is full of great features. To help you get to know them, we have included Tips and Tricks when you launch your PC*MILER Navigator the first time. (See page 52 for additional information on tips and tricks) Additional information for CoPilot Live is available on the web at www.copilotlive.com/ support. To find the online address easily • Tap Menu > > > Tips & Tricks.
FOR YOUR SAFETY CoPilot Truck is designed as a tool to get you from Point A to Point B along the most efficient and truck-specific routes. However, some of the information in the database may change from time to time. You must stay alert and pay attention to road signs at all times. Support Visit the support section at www.pcmnav.com for Frequently Asked Questions (FAQs) and additional information.
PC*MILER Routing Types Practical Routes: Practical routes represent distances and driving routes that a driver would normally take to minimize time and cost. Practical routes model the trade-off between taking the most direct path and staying on major, high quality highways. Interstate highways are given a higher priority than toll roads, which, in turn, are given a higher priority than secondary highways, and so on.
National Network routing stays on the National Network to the maximum extent possible. Given that many areas are not directly served by the National Network, the origin and stop-offs of your route may not be on the National Network. In these cases PC*Miler will take the shortest reasonable path from the origin and stop-offs to the Network. Detailed Route Reports (driving directions) for PC*MILER National Network routes provide a warning wherever the route is forced to use a non-conforming link.
types, the Heavy and Light Vehicle routing option is also a critical setting. A “heavy vehicle” is one weighing at least 80,000 pounds; a “light vehicle” weighs less than 80,000 pounds. When Override Restrictions is left unchecked, Heavy Vehicle routing will be in effect, so both truck-prohibited and truck-restricted roads will always be avoided. In addition, Heavy Vehicle routing takes nationwide 13’ 6” height restrictions into account. Override Restrictions is part of the standard routing profile setup.
User’s Guide 57
Icon Legend Truck Specific Icons Legend Truck-Routing Route -Weight Warning Hazmat-Routing Route-Width Warning Truck-Restricted Route-Height Warning Hazmat-Restricted Truck Services Route-Length Warning Border Crossing General POI Icons Legend 58 Airport Attractions Auto Dealership Bank ATM Border Crossing User’s Guide
Icon Legend Bus Station Place of Worship Entertainment Parking Event Facility Railway Station Ferry Terminal Rest Area Gas Station Restaurant Grocery Store Retail Hotels Rent a Car Marina Schools & Universities Medical Sports & Recreation Municipal Truck Services Other Vehicle Repair User’s Guide 59
Trouble Shooting WHAT IS THE SD CARD SLOT FOR? Memory card slot may be used for future map updates. WHY WON’T MY UNIT TURN ON? The power button must be held down for 4 seconds for the unit to turn on. If that does not work, check the power. Does the battery need to be charged? When connected to the power cord does the charging light come on? If the unit still does not turn on, press the reset button on the back of the unit.
WHY DOES MY UNIT SOMETIMES MISS ANOUNCING THE STREET NAME? When one turn immediately follows another, the name of the second street is not announced. This is to ensure you have the information needed to make the correct turn. WHAT IS THE DIFFERENCE BETWEEN SEARCHING FOR A POI NEARBY AND SEARCHING FOR A POI NEAR A DESTINATION? POI nearby searches for destinations located within a given radius of your current location.
EULA END-USER LICENCE AGREEMENT FOR PC*MILER® NAVIGATOR, POWERED BY COPILOT® SOFTWARE Please read the following agreement (“License”) carefully. Acceptance: Installation or use of the enclosed ALK Technologies, Inc. (“ALK”) software (the “Software”) on your device constitutes your acceptance of these terms.
End-User Remedies: If the Software does not conform to the “Limited Warranty” above, ALK’s entire liability and your sole and exclusive remedy will be, at ALK’s option, either to (i) correct the error, or (ii) help you work around the error, or (iii) accept a return and issue a refund through your retailer. The Limited Warranty is void if failure of the Software has resulted from your fault, abuse, or misapplication.
U.S. Government Restricted Rights: The Software is provided with restricted and limited rights. Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in the appropriate subparagraphs of the Commercial Computer at 48 C.F.R. 52.227-19 or in the appropriate subparagraphs of the Rights in Technical Data and Computer Software clause at 252.227-7013 of the Defense Federal Acquisition Regulations. The Copyright to the Software is held by ALK Technologies, Inc.
© 2010 ALK. All rights reserved. Personal Use Only. “You” means you as an End-user or as a “Company” on behalf of its End-Users which are subject to either a Non Disclosure Agreement as Employees or a License Agreement that contains the same restrictions as herein as a Value Added Reseller. Also as used in this EULA, “personal use” can also be understood in more general terms as for a Company’s use.
Disclaimer of Warranty: ALK AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.
cause undesired operation. For updated EULA information, if any, please check www.alk.com/legal Noetic, Inc. Limited Warranty Hardware: Noetic, Inc. warrants to the original end user (i.e. Customer) that this product will be free from defects in workmanship and materials, for one year from the date of original purchase from Noetic, Inc. The provisions of this warranty shall not apply if, in Noetic, Inc.
OR ANY SPECIAL INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHICH THE PURCHASER MAY SUSTAIN. IN NO EVENT SHALL NOETIC, INC.’S LIABILITY EXCEED THE PURCHASE PRICE OF THE DEFECTIVE PRODUCT. NOETIC, INC. NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. NOETIC, INC.
When the implied warranties are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary depending on local law. Governing Law: This Limited Warranty shall be governed by the laws of the State of Minnesota, U.S.A. excluding its conflicts of laws principles and excluding the United Nations Convention on Contracts for the International Sale of Goods. Noetic, Inc.
Index End Detour 24 2D Destination 33 Entering Multiple Destinations 25 2D Next Turn 33 Estimated Fuel Costs 30 2D View 31 ETAs and Distances 52 3D View 31 EULA 62 53 Foot Trailer Routing 55 Favorites 19 About CoPilot First-Time Setup First-Time Position Fix 13 General POI Icons Legend 23 Getting Started 5I GPS Track Playback 24 GPS Status 41 Guidance 24 Hardware Support 40 Hazardous Material Route 6 Types & Road Categories 7 Hazmat R
Loading a Saved Trip 28 Locate Points of Interest 13 Manage POIs 46 Map Display 36 Map Styles 35 MapSure™ 50 MapSure™ Updates 50 Mounting PC*MILER Navigator 4 My Places National Network Route Nearby Noetic, Inc.
Navigator Copyright © 2010. ALK Technologies, Inc. All rights reserved.
