User`s guide

User’s Guide

• Navigator cradle

: Stylus is located on the back of the Navigator cradle

Assembling the Windshield Mount

• Select a location for the mount on the windshield that does not ob-

struct the driver’s view or interfere with operation of the vehicle.

• Clean and dry this area to remove any grease or dirt.

• Place suction cup on the windshield in the desired location; push the

locking lever towards the base of the mount. The mount should stick

to the surface.

If mount does not stick, make sure the area is clean and dry, then try

again.

• Align the tabs on the holder with the slots on the Navigator cradle.

Slide together until the cradle is seated firmly.

• Adjust the adjustable arm to the best viewing angle by:

o Loosening the adjustor dials

o Moving the corresponding part to the desired position

o Tightening the adjustor dials

• Align the grooves on the bottom of your unit with the tabs on the

bottom of the navigator cradle; gently push the unit into the cradle

until the unit seats firmly.