User`s guide

User’s Guide
60
Trouble Shooting
WHAT IS THE SD CARD SLOT FOR?
Memory card slot may be used for future map updates.
WHY WON’T MY UNIT TURN ON?
The power button must be held down for 4 seconds for the unit to turn
on. If that does not work, check the power. Does the battery need to be
charged? When connected to the power cord does the charging light
come on? If the unit still does not turn on, press the reset button on the
back of the unit.
WHY AM I UNABLE TO GET A GPS SIGNAL OR FIX?
The very first time you use the navigator, it can take up to 10 minutes
to initialize the GPS and get a fix on your current location. After the
first time, GPS reception should start within 1 minute of turning on the
device. If the navigation device has been switched off for more than
1 week, the next initialization can take up to 5 minutes. For the GPS to
properly receive satellite data it needs a clear view of the sky. The most
common limitations to receiving GPS signals are urban canyons, tunnels
and metallic surfaces. Most of the time, this is not an issue. If you are
experiencing difficulty, place your unit near the rearview mirror.
WHY IS THE NIGHT MODE NOT WORKING?
The Night map style maybe set to a Day map style (See page 34 to set
the Night map style).
MY DEVICE IS STUCK ON A BLANK SCREEN WITH A “+” SIGN?
This is the calibration screen. Using the stylus (stored in the back of the
cradle), please touch the exact middle of the “+” it will move to the top
left of the screen, again, please touch the exact middle of the “+” sign
with the stylus. Keep following the “+” sign and touching the center of it,
until the screen goes white and the menu screen returns to the view.