User's Manual

51
Winterizing and Long-Term Storage
FOLLOW ALL OF THE ABOVE SHUT-DOWN PROCEDURES,ADDING
THE FOLLOWING STEPS….
• After disconnecting the water supply, and before disconnecting the
high-pressure hose, turn the pressure washer on for 2-3 seconds, until any
remaining water in the pump exits. Turn unit off immediately.
CONTINUED USE OF THE PRESSURE WASHER WITHOUT
WATER SUPPLY ATTACHED WILL CAUSE SEVERE DAMAGE TO
THE UNIT!
• Always store the pressure washer, parts, and accessories in an area with a
temperature above 0° C (32° F).
WARNING: FAILURE TO COMPLY WITH THESE STORAGE
INSTRUCTIONS WILL RESULT IN DAMAGE TO THE PUMP
ASSEMBLY
.
Maintenance
• This pressure washer is supplied with a closed lubrication system, so no
addition of oil is needed.
• Check all hoses and accessories for damage prior to use.
• Check the water intake filter periodically for deposits. Clean this filter
regularly for maximum performance.
1600 PSI Pressure Washer