Owner`s manual

Installation (contʼd)

Supporting and Mounting

Mount the generator on a concrete slab capable of supporting the weight of the generator. The

slab must extend on all sides beyond the frame by at least one foot. Contact a cement contractor

for slab specifications if necessary. Attach the frame to the concrete slab using 3/8” diameter

expansion anchor bolts (not supplied).

Grounding

NOTE: IT IS RECOMMENDED THAT ONLY A TRAINED AND LICENSED

ELECTRICIAN PERFORM THIS PROCEDURE

Connect a #6 AWG grounding wire (not included) from the ground connector (8) on the generator

to a grounding rod (not included) that has been driven at least 24 inches deep into the earth. The

grounding rod must be an earth-driven copper or brass rod (electrode) which can adequately

ground the generator.

Ownerʼs Manual