Instruction manual

Specifications
CC/CCS Power Conditioner User Manual 17
CC AND CCS Series Specifications
Table 2 . CC and CCS Series Specifications
Characteristic Specification
Width (inches) 10.5 (26.7 cm) [alternate mounting - 12.7 (32.3 cm)]
Height (inches)
10.5 (27.7 cm) [reduced height construction – 9.7 (24.6
cm)]
Depth (inches) * 17.6 (44.7 cm)
Line Cord Length - Std
(feet)
10 (3.0 m)
RF 50 Ohm Insertion Loss
400 kHz to 4 MHz (typical)
100 kHz to 10 MHz (typical)
30 kHz to 30 MHz (typical)
50 dB
40 dB
30 dB
Efficiency at Rated Load
(%):
CC Series
CCS Series
> 95
> 97
Load Power Factor Range
(Crest Factor)
0.3 leading to 0.3 lagging
Surge Voltage Withstand
Capability
ANSI/IEEE C62.41 Category A&B, 6 kV/ 200A,
500A,100 kHz ringwave and 6 kV/3000 A impulse wave.
Normal & Common Mode
Clamping Response Time
Instantaneous
Surge Voltage Let-Through
(max.) 6kv ANSI/IEEE
C62.41 Cat. A
< 10V Normal mode (L-N), < 0.5V Common mode (L-G)
Distortion < 1% THD added into a resistive load
Load Regulation ± 2%
Load Regulation Response
Time
< 2 msec for a 50% change in load
Interruption Response Time
Output voltage will track input voltage in less than 2
msec at power-off and power-on for a single-cycle
asynchronous notch.
Ambient Operation
10,000 ft (3,000 meters) max. elevation, 0-95 % humidity
non-condensing, 32-104°F (0-40°C)
Cooling Convection