User`s manual

11 - 3 11 - 3
MELSEC
11 TROUBLESHOOTING
11.3 Flowchart to Use when the Board or PC do not Operate
The following indicates a check procedure in the PC unit when the CC-Link board does
not run normally during startup.
NO
YES
YES
NO
YES
YES
YES
NO
NO
NO
NO
YES
END
NO
YES
START
1)
2)
Is the A80BDE-J61BT13
"RUN" LED lit?
Is the operating system
starting normally?
Remove any other optional
boards and leave only the
A80BDE-J61BT13 in.
Is there
a driver message in the
management tool event
viewer? *1
Replace the A80BDE-J61BT13.
Replace the A80BDE-J61BT13.
Replace the A80BDE-J61BT13.
Replace the A80BDE-J61BT13.
Is a WDT error occurring?
Start the utility.
Is a WDT error occurring?
When the
operating system was
started, did the screen change
to blue, then displayed
a system error?
When the
operating system was
started, did the screen change
to blue, then displayed
a system error?
Remove all A80BDE-J61BT13.
Reinstall the operating system or
contact the Microsoft Corp.
R
Microsoft Windows XP Professional
Operating System, Microsoft
Windows 2000 Professional Operating
System, Microsoft Windows 95
Operating System, Microsoft
Windows 98 Operating System,
Microsoft Windows NT Workstation
Operating System Version4.0.
R
R
R
R
R
R
R
R
R
press the Apply button and reset
the board.
Or take the measures for WDT error
occurrence. (Refer to Section 11.6.)
With the board information screen,