Manual

Owner'sManual

Compressor(cont'd)

Maintenance(cont'd)

Checkingthe ReliefValve

Pull the relief valve daily to ensure that it is operating property and to clear

the valve of any possible obstructions.

Testingfor Leaks

Check that all connections are tight. A small leak in any of the hoses or pipe

connections will substantially reduce the performance of your air

compressor. If you suspect a leak, spray a small amount of soapy water

around the area of the suspected leak with a spray bottle. If bubbles appear,

repair or replace the faulty component. Do not overtighten any connections.

Storage

Before storing the compressor for a prolonged, use an air blow gun to clean

all dust and debris from the STORAGE compressor. Disconnect the power

cord and coil it up. Pull the pressure relief valve to release all pressure from

the tank. Drain all moisture from the tank. Cover the entire unit to protect it

from moisture and dust.

Servicing

PeMorm the following maintenance at the intervals indicated below:

• Operate the pressure relief valve: Daily

• Drain tank: Daily