Specifications

Owner'sManual

Operation

Note: The parts fistings above are helpful for locating the controls

mentioned below.

CAUTION: PRIOR TO FIRST USING THE GENERATOR, THE

ENGINE MUST BE FILLED WITH APPROXIMA TEL Y ¾ (0.63)

QUART OF A HIGH QUALITY SAE 10W-30 GRADE ENGINE

OIL. TO DO SO, UNSCREWAND REMOVE THE ENGINE'S OIL

DIPSTICK LOCA TED A T THE BOTTOM OF THE ENGINE

CRANKCASE. FILL THE ENGINE'S CRANKCASE UNTIL THE

OIL LEVEL IS LEVEL WITH THE UPPER MARKED LINE ON

THE DIPSTICK. THEN, SCREW THE DIPSTICK BACK INTO

THE OIL FILL HOLE.

Before Starting the Generator

Check that the engine power switch

is in its "OFF" position (see diagram

on next page).

Before the first use, remove the fuel

tank cap and fill the fuel tank with

unleaded gasoline. Wen fueling, be

sure tha the fuel strainer is in place.

Replace the fuel tank cap.

Thereafter, check the engine's fuel

gauge for the amount of unleaded

gasoline in the fuel yank. If

necessary, refill the fuel tank with

unleaded gasoline; the generator

must be turned off and cooled down

before refilling the fuel tank.

FUEL TANK CAP