Manual

3.4 Checking the Generator
1. Make certain that you turn off the
mail1 switch and any other electrical
load before inspecting the generator.
Warning:
• Turn off the main switch
before starting
• The generator must be grounded
to prevent electrical shocks.
Low oil warning lamp
AC output receptacle Ground terminal
2. Operating dual voltage generators.
• Make sure that you use the correct
outlet for the rated voltage of the
device being powered.
Caution:
• The main switch must be in the "on"
position during operation.
• Before starting the engine, either unplug the devices to be powered or
make certain that all of the devices are turned "off". If the switches for the
devices are left in the "on" position and the generator is started the sudden
surge in power can be very dangerous.