Manual

3.5 How to open the cabinet door
covers of the generator.
1. Always open the generator cabinet door
and inspect the engine prior to starting
the generator. To do this, simply turn the
lever counterclockwise and raise the
door.
2. Loosen the wing nut of the air cleaner
and inspect the cleaner.
3. Open the wing nut on the cover and
inspect the nozzle cover.
and remove the protective
3.6 Breaking in your new generator
The first 20 hours of operation are required to properly seat your generator's
operating parts. During this period, the following steps must be taken:
• During the initial operation, run the generator at low speed and with nothing
plugged in for a minimum of five minutes,
• Avoid applying any heavy demands to the unit during the break-in period.
All-Power recommends that the engine be operated at 3,000 RPM with no more
than a 50% load for the first 20 hours of operation.