$45.75 $36.95 $159.95 $253.95 $319.95 $199.95 $429.95 $289.95 $489.95 $34.95 $76.
6 / 12 V. Fast Charger 250 Amp cranking assist. Made in U.S.A. ASE-6012 $459.95 12V (1.5 AMP) Automatic Charger Maintainer. ASE-9002 $49.95 Made in USA. 6 / 12 Volt Portable Automatic Chargers with Engine Starter 12V Gang Charger Features 4 detachable 6’ leads with 300Amp H.D. clamps. Charging channels control voltage and current up to 20 Amps per circuit. ASE-6366 $1,375.00 H.D. 6 / 12 V. Fast Charger 265 AMP C.A. Made in U.S.A. ASE-6009 $549.95 10 / 2 / 55 Amp ASE-9060 $124.95 Made in U.S.A.
2 Year Limited Warranty Octane Series Wheel Chargers 2 Year Limited Warranty Battery & System Tester with Built-In Printer -Enhanced Transoid Transformer design for improved durability and increased efficiency. -New Quad Force Rectifier design meets the demands of daily use. -Rugged, Industrial-Grade Clamps. 6 / 12 / 24 V Battery Charger 60/40/2 amp and 250 amp engine starting assistance, tester. SOL-OS6150 $529.95 6 / 12V Battery Charger 60/40/2 amp and 250 amp engine starting assistance, tester.
6/12V Battery Charger/ Booster. “Smart Starter” Professional Duty Battery Service Equipment Safety Starter/ Booster Cart Service Express Competitively priced, features 70 Amp fast charge rate for faster service/charging times and provides 250 Amp starting assistance. CSA listed for outdoor use. 5/2/1 warranty. Made in USA. CHR-QWC $675.00 “DUD Buster” For 12V Battery Charging. It is user friendly since there are no controls to set and no meters to monitor.
The Official Battery Analyzers of NASCAR! inTELLECT EXP Expandable electrical diagnostic platform. At the core of this analyzer is Midtronics NEW “Dynamic Conductance Technology” which combines additional test inputs, measurements and processing power for better test accuracy. Test 6 & 12 V batteries and 12V electrical systems. MT-EXP-1000 $1,195.00 Also Available: Master inTELLECT EXP Kit. Comes with Amp clamp and infrared printer. MT-EXP-1000AMPKIT $1,785.
LOADpro Bundle -Includes 60" dynamic test leads, 200 page troubleshooting guide. - Works with your existing DMM. - Finds wiring problems fast by loading the circuit. - On-the-fly “voltage drop” test finds problems like corrosion and frayed wires. - Find these problems fast: High corrosive resistance, shorts to ground, open circuits. ES-181 $114.95 Test Leads Only. ES-180 Vacufill The most economical coolant exchanger on the market! $79.
ELECTRONICS 6/12V, 100 Amp Battery Load Tester has H.D. copper plated clamps, extra large display with zero adjust. OTC-3180 $47.95 6/12V 130 Amp Heavy Duty Battery Load Tester features uniquely designed clamps for both top and side post batteries and ergonomically designed handle. OTC-3181 $62.95 6/12V 130 Amp Digital Battery Load Tester with alternator test lead, features uniquely designed clamps & ripple detection light. Tests state of charge, starter, charging system, etc. OTC-3182 $83.
2 Channel Labscope Easy to use and read, comes with waveform library and presets measurement ranges for over 50 different sensors and actuators. Features RS-232 port and CD based instruction manual. FT-93 $995.50 Black Plastic Housing Dial type - advance timing light. FT-82S $149.95 Plastic Housing Diesel Injection Detector Timing Adapter. Works on any diesel !Digital Tach - Advance w/ carrying case. engine that has a 1/4” external Order No. FT-84 $222.25 fuel line.
Mini Digital Multimeter Only 2” x 4” x 1/2” -16 test ranges -6 test functions ES-501 $24.95 Autoranging Digital Multimeter with 10 test functions and data hold. Measures 3 1/2” x 6 1/2”. ES-480A $59.95 48 Test Ranges 18 Test Functions. !20AMP(.01A 15 Test Functions 48 Test Ranges resolution) ES-302M $30.95 !30AMP (.1A resolution) Premium Automotive Multimeter is a CAT III – 1000 Volt rated tester that also measures the on-time (pulse width) of fuel injectors.
- 10 test functions Pro-Grade Laser Tachometer with memory function that saves maximum and minimum RPM readings. Range to 99,999RPM. ES-332 $99.95 Electronic Specialties - 35 test ranges -Auto Ranging Current Probe to 200 amps that is capable of measuring as low as 10 milliamps, plus DMM multimeter. ES-685 $174.95 To 1000CCA / 160 Amp Hour. ES-710 $134.95 Compact Pro-Grade infrared thermometer. with laser pointer, backlit LCD display. Case included. Range:-58 to 1022F -50 to 550C ES-T-65 $89.
The Start-All People! Made in USA. Made in USA. Gas-Powered Start-All For 12V vehicles up to and including semi-tractors. 18 HP Briggs & Stratton Vanguard OHV V-twin engine with electric start. 700 Amp cranking. Cables are 1 gauge, 30’ long complete with 1000 Amp clamps. MA-11-610 Call for Pricing. Also Available: 12 and 24 Volt Starter for off-road, transit & military needs. Cranking capacity: 12V. 700 AMP, 24V. 400 AMP.
X431 Diagun Super Vehicle Scanner Purchase a 2nd Smart Connector and Scan 2 Vehicles at the same time! X431 Master Designed for the professional technician, this handheld, compact unit features fast boot up, has a 4.3” colour screen, 16-Pin smart connector, CAN capable, Bluetooth communication and cable communication support, a standard USB update port for updates, USB printer port, 1GB memory card & external memory support. 2 year warranty and 1 year internet updates.
12 Visit our website at WWW.AUTOFORCE.CA.
Visit our website at WWW.AUTOFORCE.CA.
V30 European / Asian Coverage FREE 2 Year -Drivetrain -Chassis -Body -A/C, etc. Internet Updates if purchased by 31/12/2009. With 3 Million Verified Fixes at the touch of a button, helps prioritize fixes specific to the vehicle’s make, model, year and engine. OBD II, CAN & ABS Scan Tool Features include Code Connect, records and plays back live engine data and has enchanced code request for GM, Ford, Chrysler and Toyota vehicles including HD, Hybrid and Diesel vehicles. OTC-3111 $335.
ELECTRONICS Leak Tamer Plus EVAP 2010 Oil Light Reset Tool Kit complete with OBD II, BMW, VW, Volvo and Mercedes-Benz cables. OTC-3596H $Call Updated! Solarity Scope 4 - Channel Full Function Scope, now with 2006 InfoTech software covers virtually all vehicles on the road today & assists in servicing engine, transmission & ABS systems. Includes 4DMM leads, ground lead, kV ignition lead, ignition sync lead, HEI adapter, InfoTech smart card, manual & case.
Automatic Transmission and Engine Oil Pressure Tester with Two Gauges in a vinyl pouch. Includes 6 ft. of oil proof hose and 10 assorted fittings. SG-34550 $81.40 Master Noid Light IAC Test Light Kit. Complete with recessed plug in-line spark checker shown below. SG-36350 $59.95 Automatic Transmission and Engine Oil Pressure Tester with 2 Gauges in molded plastic case. Adapters provide coverage of most domestic and imported cars and light trucks. SG-34580 $86.
TM Sheffield Research Division Generators 1 Year Warranty Smartach D Digital Diesel Engine Tachometer Universal transducer clamp attaches quickly to fuel inj. lines. # 6 foot cable - take RPM readings away from hot or moving parts. # Adjustable threshold and sensitivity level. # For 1 to 12 cylinders and 2 or 4 cycle engines. # Measures 200 to 20,000RPM. SR-TA300 $299.95 1200 Watt Peak Portable Generator # Has a 2.5HP, 4 stroke air cooled single cylinder engine with recoil start.
$99.95 $299.95 $399.95 $179.95 $259.95 $349.95 $159.95 $29.95 18 $36.95 Visit our website at WWW.AUTOFORCE.CA. $137.
OptiMate 6 The Original Bone Creeper 5 Amp Sealed AMPMATIC Desulfating charger, maintainer & tester. Weatherproof enclosure that includes wall mounts and cables rated down to -40 F/C. TEC-TM-181 $124.95 OptiMate 5 ! Won’t tip, flip or pinch ! Rolls over drop light cords, cracks, grates, etc. ! 5 1/8" diameter 1" wide casters ! Custom designed wheels with soft, grippy TPE tires ! 1 3/4" ground clearance ! 300 lb. capacity ! 47” L x 25 1/2” W x 6 1/4” H BC-6031 $179.95 2.
20 Visit our website at WWW.AUTOFORCE.CA.
Visit our website at WWW.AUTOFORCE.CA.
$114.95 $182.95 $99.95 $76.95 $159.95 $28.95 $46.95 22 $48.95 $13.95 Visit our website at WWW.AUTOFORCE.CA. $64.
Visit our website at WWW.AUTOFORCE.CA.
R-134a AIR CONDITIONING TOOLS & TESTERS Refrigerant Recovery Recycling Machines. at Gre ! Buy Programmed Languages Include -English -French -Chinese -Russian -Etc... Special Flow Control Technology and a 6 CFM vacuum pump for a fast system evacuation. Fully Automatic, J2788 and J2788H compliant R134a refrigerant machine comes fully assembled. Just add refrigerant and you are ready to service your customer’s vehicles.
AIR CONDITIONING TOOLS & TESTERS Pro-Grade A/C Compressor Clutch Tool Kit. Two Stage Vauum Pumps designed to pull deep vacuum fast to 15 Microns. 3 CFM, 1/3 HP, 115/230V CPS-VP3D $269.95 ! 6 CFM, 1/2 HP, 115/230V CPS-VP6D $319.95 ! Made in USA. 4 Piece Anodized Aluminum A/C Disconnect Tool Set for Ford and a variety of import vehicles. Sizes: 3/8”, 1/2”, 5/8” and 3/4”. CPS-TL7881 $49.95 Removes and installs most A/C compressor clutches.
R12 / R134a Electronic Leak Detectors Audible & visual leak indicators. ROB-16600 $229.95 R-134a Recovery, Recycling, Evacuation and Recharging Fully Automatic Machines SAE J2788 Compliant. R12/R134a Leak Detector with heated pentode sensor -True Mechanical Pump provides instant response and clearing -3 year warranty TIF-ZX $389.95 1 Year Warranty Slimline - Portable Refrigerant scale. Capacity range 0-50kg (110lbs), 9V DC power supply, reading accuracy of +/- 0.5%. TIF-9010A $259.
12A A/C Cool Refrigerant Contains high performance oil to improve system efficiency and universal dye to help with leak detection. System Safe. SIZE 170g/6oz EM-45851 $5.74 12A A/C Stop Leak Seals leaks permanently in metal and rubber parts, including evaporators, condensers, driers, O-rings, and gasket joints. Safe for all systems and will not clog or restrict flow. SIZE 114g/4oz EM-45856 $11.
$Lubricants $Detailing $Cleaners $Coatings G28 Penetrating Foam G5 Glass Cleaner Penetrates surfaces and through rust to allow tight or sticky parts to be loosened. Non-drip Foam formula. Lubricates and protects surfaces, repels water and displaces moisture. 445g / 15.7 oz. EM-44028 $5.71 Ammonia fortified for superior strength. Cleans windows, mirrors, windshields, tile, porcelain, stainless steel, chrome. It is a streak proof professional quality aerosol. Silicone free, no soap. 517g / 18.25 oz.
$Lubricants $Detailing $Cleaners $Coatings Odor Stop (Neutralizer) G19 Ultimate Shine Odour neutralizer specially formulated to tackle problems due to moisture accumulation in vehicle A/C systems. Excellent for cigarette-smoke, mildew and mold odor removal and to freshenup older cars and trucks. 156g / 5.5oz. EM-44210 $6.89 Super high-gloss treatment beautifies, renews & protects surfaces in auto, truck, boat and industrial applications.
30 Visit our website at WWW.AUTOFORCE.CA.
Get The ADVANTAGE Automatic Transmission Fluid Exchanger Utilizes a process where the vehicles own transmission regulates the exchange of the ATF fluid thus guaranteeing proper pressure and fill are maintained while virtually all the ATF is exchanged. A 12V on-board pump for speedy cylinder filling.
Wheel stud pilot pins fit Audi, Mercedes, BMW, VW, Volvo, SAAB and others with bolt-style lugs. Made In U.S.A. 13pc Deluxe hubcap & wheel lock removal set for most O.E.M. and aftermarket styles. BDT-LR4000A $249.95 !14mm X 1.5mm thread. THX-499 $57.95 BDT - Carbide Inserts for Brake Lathes. !12mm X 1.5mm thread. THX-500 $57.95 !For Ammco - BDT-062-10 Pack of 10 $20.95 !For FMC use BDT-407-10 Pack of 10 $34.95 Coil-on plug spark tester. Measures coil output and tests for no-start conditions.
Computer and Airbag Safe Sonic Sensor Test Light. Identifies power, ground and open circuits on 6/12/24/42 and 42V Hybrid systems. 14 Pc. Radiator Test Kit includes tester, temperature gauge & an assortment of anodized aluminum adapters to cover most passenger cars. CPS-TLRAD $239.95 SAE, concentric flaring tool with ratchet for R410a (HVAC only). Ideal for copper, brass and aluminum (3/16” to 3/4” range). CPS-FT800FN $119.95 Dual audible tone and bi-colour LED Inicator.
FUEL INJECTION This canister fuel injection cleaner connects directly to shop air, and when used with recommended solvent (right), will clean injectors more effectively than aerosols. $149.95 OTC-7448 This high performance fuel injector cleaning fluid restores injector pattern, helps prevent recurring problems and reduces intake and exhaust port deposits. Use full strength - no mixing. Case of twelve 16 oz. cans. $112.95cs OTC-7000 Master Fuel Injection Diagnostic Set For domestic and import vehicles.
Hot Deals! Silverline Elite Test Kit is capable of producing either vacuum or pressure with equal precision & convenience. MV-8500 $74.95 Professional grade brake and clutch bleeder. Using shop air, you can bleed up to 2 quarts per minute. Includes refill kit. MV-6830 $164.95 Fuel Injection Pressure Test Kit ( 0-100psi) includes adapter for domestic vehicles equipped with test ports on the fuel rail. MV-5515 $46.
Terminal Tool designed for Pack-Con & Weather-Pack on GM C3 systems. LIS-14900 $15.95 Bell with snaps adapts all styles of pipes to 2-1/2” hose. CRU-UA $34.95 Flarelock - Garage Exhaust Hoses Sold in lengths of 11 feet. Dual Exhaust Adapter works with 3” hose. CRU-DX Barb Depressor for conventional terminals. LIS-56500 $12.95 $37.95 Available in: 2-1/2” CRU-250 3” CRU-300 4” CRU-400 Rubber “Y” Connectors. Rubber Door Port for 2-1/2” exhaust hose. !2-1/2” size. CRU-YA $28.95 CRU-DP1 !3” size.
$349.95* $449.95* $489.95* 2 $159.95 Visit our website at WWW.AUTOFORCE.CA.
7 Pc. Jumbo Combination Wrench Set. ( 1 5/16” - 2”) SX-9707 $119.95 !Metric (33,34,36,38,41,46, & 50) SX-9707M $119.95 Pro-Grade 3 Piece (12”, 17” and 25”) Premium Quality Angle Pry Bar Set with “noslip” grips. SX-9803 $47.95 !SAE SX-3935 $229.95 Pneumatic Brake Caliper Tool Set Features include: -One hand operation -Finger controlled pressing speed -16 various sized pads. 4 Piece Super Jumbo SAE Combination Wrench Set. Range: 2-1/8”, 2-1/4”. 2-3/8”, 2-1/2”. SX-9604 $209.
t oin ts P 12 pac Im 3/8” Drive Standard Length Impact Socket Sets: ! SAE 12pc set, 5/16” to 1” SX-3674 $39.95 ! Metric, 13pc set. 7 - 19mm. SX-3675 $34.95 3/8” Drive Deep Length SAE -12 pc (5/16 to 1”) SX-3680 $53.95 ! Metric -13pc (7-19mm) SX-3682 $48.50 ! 12mm x 12 point 3/8” Dr. Universal impact socket for Ford driveshafts. SX-312ZUM $14.95 1/2” Drive Standard Length SAE - 14pc (7/16 - 1 1/4”) SX-2678 $59.95 ! Metric - 13pc (10-24mm) 20 & 23mm not included SX-2679 $46.
3/8” Dr. Standard Length Impact Socket Sets. ! SAE 12 pc, 5/16” to 1” SX-3360 $38.95 ! Metric 13 pc, 7 to 19mm SX-3358 $26.95 4 Pc Impact Extension Sets, 3”, 5”, 10” and 15” Long ! 3/8” Dr. SX-3500 $49.95 ! 1/2” Dr. SX-2500 $64.60 3/8” Dr. Deep Impact Sockets ! SAE 12 pc, 5/16” to 1”. SX-3361 $52.95 ! Metric 13 pc, 7 to 19mm. SX-3359 $43.95 1/2” Dr. Standard Length Impact Socket Sets. ! SAE 13 pc, 7/16” to 1 1/4” SX-2650 $46.95 ! Metric 14 pc, 10-19, 21, 22, 26 and 27mm. SX-2652 $46.
6 Point Add On Sets. 1/2” Drive Impact Add-On Shallow Socket Sets. Increases the range of your current Sunex 2650 or 2652 Sets. 3 Piece Flexible Pick-Up Tool Set consists of 1/4” magnetic bit driver, 1/4” drive socket driver and a 2 in 1 magnetic claw pick-up tool. 24” long shafts provide easy access/retrieval. SX-9813 $39.95 SAE 16 Piece Set. Range: 1 5/16” to 2 1/4”. SX-2690 $315.00 ! Metric 12 Piece Set. Range: 23 to 36mm. SX-2692 $99.
Heavy Duty Adjustable Work Table with Drawer. 220lbs. capacity. Telescopes from 34” to 47” in height, comes with four 2” castors. SX-8019 $149.95 2 Shelf Service Cart features anodized/aluminum legs, 4” H.D. swivel casters, polythylene surface and 350 lbs. max capacity. 2” deep shelves. Dimensions: 29” x 16 3/4”. SX-8032 $169.95 Multi-Purpose Service Cart has 2 - 3” deep shelves and 350 lbs. load capacity.
The Latest Hand Tools from Striking / Cutting Tools 5 Piece Pin Punch Set. Range of 1/8” to 5/16”. With pouch. GW-82309 $33.95 4 Piece Long Tapered Punch Set with a range of 1/8” tip x 8” long to 1/4” tip x 11” long. With vinyl pouch. GW-82307 $39.95 Combination 3” Blade and Utility Knife complete with storage pouch. GW-82881 $19.95 27 Pc Punch and Chisel Master Set. Includes 8 cold chisel sizes, 3 centre punches, 6 pin punches, 4 long tapered punches, 6 starter punches and tool roll.
6 Piece 4” Mini File Set features cushion gripped handles and storage pouch. GW-82821 $38.95 Add-On Sets to the Career Builder Set Shown on the Next Page. 45 Piece Add-On Set for the Diesel Mechanic. 4 Piece 8” Long File Set includes flat, triangle, round and half round. Complete with handles. GW-82820 $64.95 7 Piece Hook and Pick Set made of hardened alloy steel. Includes a 4 1/2” long awl. GW-84000 $38.95 GW-83092 $859.
Career Builder - 238 Piece Starter Set A practical way to equip yourself with the most commonly used tools, in a variety of professions. Set Includes: -SAE and Metric Sockets, plus the Ratchets and Extensions in 1/4”, 3/8” and 1/2” drive. 6 point. -SAE and Metric Combination Wrenches. -Pliers, Screwdrivers, Hex Keys. -Punches, Chisels, Hammers, etc. GW-83091 $1,850.00 BONUS: Get an extra 10% off on SPG INTERNATIONAL Roller Cabinets when purchased with this set.
Hand Tools Lifetime Warranty* Stubby NonRatcheting Combination Wrench Set, SAE & Metric in tray. Range: 3/8” - 15/16” & 10-19mm. 20 Pieces. GW-81903 $169.95 Also available: ! SAE only, 3/8” to 15/16”. GW-81905 $89.95 ! Metric only, 10-19mm. GW-81904 $89.95 Flare Nut Wrench Sets in Molded Trays. SAE 6 piece set with range between 1/4” to 7/8” sizes. GW-81907 $54.50 ! Metric 6 piece set with range between 9mm & 21mm (less 20mm). GW-81906 $69.95 ! Flex Flare Nut Wrenches 7 Piece Plier set in Tray.
Hand Tools Lifetime Warranty* 1 2 3 4 12 Piece Slot & Phillips Screwdriver assortment packaged in tray. Set has 6 slot drivers of which 4 have bolsters and are 1-1/2” to 8” in length. Plus 6 phillips sizes #0 to #3 and range 2 1/2” to 6” in length. GW-80051 $76.95 Dual material handle for comfort and performance on all drivers. 40pc Master GearDriver Set includes 3 different ratcheting handles, 2 flex shafts, 4 solid shafts, 30 drive bits & case. GW-8940 $84.95 4 Piece Long Screwdriver Set.
“Original” Ratcheting Wrenches STANDARD LENGTH Reversible Standard Length Ratcheting Wrench Sets Super Savings on Ratcheting Wrench Sets Ratcheting Wrench Sets. Stubby Length. 8 piece SAE Set includes 5/16” to 3/4” in package tray. GW-9308 $83.95 8 Pc. SAE 5/16” to 3/4” GW-9533 $102.95 ! 7 pc SAE 3/8 - 3/4” GW-9507 $82.95 ! 10 pc Metric 10-19mm GW-9520 $122.95 ! XL Combination Ratcheting Wrench 4 Piece SAE Ratcheting Wrench Set continues where above set ends with sizes 13/16”, 7/8”, 15/16” and 1”.
Standard Flex Head Sets S-Shape Ratcheting Wrench Sets Super Savings on Ratcheting Wrench Sets Sizes: 3/8 x 7/16" 1/2 x 9/16" 5/8 x 11/16" ¾ x 7/8" Double Box End Ratcheting Sets ! 8 Pc. SAE 5/16” to 3/4”. GW-9701 $149.95 ! 13 Pc. SAE 5/16” to 1” range. GW-9702 $279.95 ! 7 Pc. Metric 10, 12 to 15, 17 and 19 mm. GW-9900 $129.95 ! 12 Pc. Metric 8 to 19 mm, wrench rack. GW-9901 $199.95 XL Locking Flex Head Ratcheting Wrench Sets -15% longer than current Flex head ratcheting wrench.
SAE Sockets on Rails (6 Point) Standard Length 1/4” Dr., 10 Pc. 3/16” to 9/16” GW-80303 $20.95 ! 3/8” Dr., 13 Pc. 1/4” to 1” GW-80553 $41.95 ! 1/2” Dr., 11 Pc. 1/2” to 1-1/8” GW-80703 $49.95 ! Deep Length ! 1/4” Dr., 10 Pc. 3/16 to 9/16” GW-80305 $31.95 ! 3/8” Dr., 11 Pc. 1/4” to 7/8” GW-80555 $44.95 ! 1/2” Dr., 8 Pc. 1/2” to 15/16” GW-80705 $56.95 Hand Tools Lifetime Warranty* FREE! $149 Value Get a FREE 1/4” Drive Electronic Torque Wrench with the purchase of a GW-80300.
Special Buys On Lifetime Warranty 1/4” Dr - 6 Point Chrome Swivel Sockets. SAE 7 piece set. (3/16” to 9/16”). GW-80310 $54.95 Metric 12 piece set. (5 to 15mm). GW-80311 $96.50 3/8” Dr. Chrome Swivel Socket Set. SAE 3/8” to 3/4” sizes (7 sockets) GW-80564 $62.95 ! Metric 10mm to 19mm (10 sizes) GW-80565 $89.95 ! Hex Bit Socket Set on Rails 7 Pice SAE, range 5/16” to 3/4” in 3/8” and 1/2” drive. GW-80721 $44.95 ! 7 Pice Metric, range 6,8,10,12,14, 17 and 19mm in 3/8” and 1/2” drive. GW-80720 $54.
6 Point Impact Sockets Lifetime Warranty* 3/8” Drive Shallow Sockets on Rail. SAE, 8 Piece, 5/16” to 3/4”. GW-84910 $24.95 ! Metric, 12 Piece, 8mm - 19mm. GW-84911 $31.95 ! 1/4” Drive, 71 Piece Master Impact Socket Set includes: -3/16” to 9/16” shallow and deep -Metric 4-15mm shallow and deep -Flex sockets 1/4” to 9/16”, 5-15mm - 2”, 4”, 6” extensions -U-joint -1/4” Female to 3/8” male adapter. GW-84903 $349.95 1/4” Drive Shallow Sockets on Rail. !SAE 10 Pc set. Range: 3/16” - 9/16”. GW-84906 $36.
1/2” Drive Sets Lifetime Warranty* 1/2” Drive SAE Impact Universal Socket Set SAE 6 Point Shallow Socket Sets. 12 Piece. 3/8” to 1-1/16”. GW-84931 $54.95 ! 19 Piece. 3/8” to 1-1/2”. GW-84932 $105.50 ! 13 Piece 6 Point Set. 1/2” to 1-1/4”. GW-84938 $214.95 1/2” Drive Metric Impact Universal Socket Set 3/4” Drive, 12 Point Chrome Socket Set has SAE range of 7/8” to 2-3/8”. Includes ratchet, flex handle, sliding T-handle and 5”, 8” 16” extensions. GW-80880 $439.
FLEX HEX KEYS NEW PRODUCTS Screw Holding Drivers with Cushion Grip Handles: SAE - 5 Piece Flex Hex Key Set. Range: 3/16” to 3/8” GW-82401 $36.95 3/16” wide flat screwdriver, 6” blade. GW-82791 $9.95 ! # 1 Phillips with 3” long blade. GW-82792 $9.95 ! # 2 Phillips with 7” long blade. GW-82793 $9.95 ! Metric - 6 Piece Flex Hex Key Set. Range: 3-6mm, 8mm & 10mm. GW-82411 $39.95 8 Piece insulated Nut Driver Sets: SAE, Range 3/16” to 9/16” GW-82901 $76.95 ! Metric, Range 6mm to 13mm GW-82900 $76.
SPECIALTY TOOLS Chrysler APPROVED Transmission and Transaxle Dip Stick for vehicles without factory installed transmission fluid dip sticks. Designed for Chrysler, Dodge, Jeep & Volkswagen vehicles with NAG1, 42RLE, CVT and 62TE transaxles. OTC-MLR-9336A $78.95 Brass Hammer (24 oz.) and Punch Set ideal for work on precision metal parts that can be damaged by steel tools and where sparks from ferrous metals would be hazardous. OTC-4606 $72.75 For Code: F 2.2 and B 2.4 Engines.
SPECIALTY TOOLS Power Steering pump pulley installer, also installs GM press-on water pump pulleys. OTC-7005 $42.95 Master Cam Tool Set For Ford Power Steering Pump/Alternator pulley puller. OTC-7185 $51.95 Updated! Honda/Acura Damper Holding Tool for removal & installation of the crank bolt on most Honda/Acura engines. OTC-4731A $48.95 Bearing Splitter Puller Set can handle most bushing or bearing jobs up to 3” diameter.
1 5 UNDER CAR SPECIALTY TOOLS 4 2 3 5 PC Front End Service Set with case. OTC-6295 $156.95 All items in above set are available separately. 1. Tie rod remover/Pitman arm puller. OTC-6296 $30.60 2. Tie rod remover/ball joint separator. OTC-7503 $87.50 3. Pitman arm puller. OTC-7314A $40.95 4. Ball joint separator. OTC-6297 $65.50 5. Tie rod remover. OTC-7315A $56.95 Super Duty Pitman Arm Puller for ‘05 & up F-250, F-350 4WD vehicles.
PULLERS $40.85 OTC-1020 $51.10 OTC-1021 $34.50 OTC-1022 $46.95 OTC-1023 $42.60 OTC-1024 $59.95 OTC-1026 $49.95 OTC-1025 $64.95 OTC-1027 $78.25 OTC-1035 $99.95 OTC-1037 $81.50 OTC-1036 $96.95 OTC-1038 $141.50 OTC-1039 $237.45 OTC-1041 Bearing Pulling Attachments !2” spread OTC-1122 $37.95 !4-5/8” spread OTC-1123 $76.95 !5-3/4” spread OTC-1124 $166.75 !8-5/8” spread OTC-1130 $166.
Ratcheting Terminal Crimping Kit includes 5 sets of quickly interchangeable dies for a wide range of applications. SG-18920 $119.45 Ratcheting terminal crimper for 10-22 GA insulated terminals. SG-18900 $27.85 Single action coil spring clamp. SG-62200 $69.95 “The Strutter”MacPherson Strut Coil Spring Compressor. SG-62900 $64.25 10 lbs. Slugger Set SG-80000 $169.95 Pneumatic Panel Crimper. SG-91625 $61.35 Super Duty 1/4” Cap Riveters with Rivet Stem Catching Bottle. 3 Tools in 1. H.D.
Fuel line quick disconnect tool. KD-3321 $18.65 Three-Way Battery Tool. KD-2173 $13.95 Straight Hose Clamp Plier for flat ear style clamps. Tips trap and hold clamp plus swivel for easy access. KD-3976 $19.95 Straight - Hog Ring Plier used for upholstery work on most cars. Spring loaded. KD-3703 $26.95 Made In U.S.A. “PROSWIVOIL” Filter Wrenches are specially designed to fit today’s car & truck filters. # KD-3941 (64-76mm) $19.95 # KD-3942 (73-83mm) $19.95 # KD-3943 (89-99mm) $20.
Double Flaring Tool Precisely flares tubing up to 0.040 wall thickness to SAE 45 degree flares. Range: 3/16” to 1/2” (7 sizes). KD-41860 $67.95 Bubble Flaring Tool Precisely flares tubing up to 0.040 wall thickness to Metric 45 degree flares. For sizes: 4.7, 6, 8 and 10mm. KD-41870 $84.95 Deburring Tool for removing rough edges for better flaring tube fit. KD-3905 $12.95 Brake Spring Plier removes & installs shoe return springs on most drum brakes.
25 Piece Master Plus Disconnect Set. 12 pc. Torx drive socket set T10 to T60 (1/4, 3/8 and ½” drive) LIS-27200 $36.95 Updated! Tamper Resistant Torx bit set. Master set T10 to T55 with ¼” and 3/8” drive bit holders LIS–26530 $29.95 Harmonic Damper Pulley Puller. Popular Lisle 49500 now improved with an additional rod that expand GM coverage, plus jaws are held in place with a clevis pin. LIS-51450 $99.
Exhaust Removal Plier separates hanger brackets from rubber supports on cars and trucks. LIS-38350 $23.95 Updated! Pneumatic operated fan clutch wrench set (requires zip gun). 7 Sizes- 7/8”, 1 7/8”, 2”, 32, 36, 40,47 mm. . LIS-43300 $194.95 Pneumatic Oxygen Sensor Remover. Using the power of your air hammer & the compact design of this tool makes removing stubborn baked-on oxygen sensors easier. LIS-43900 $57.95 Exhaust / tailpipe stretcher. Fits pipes from 1-5/8" to 2-7/16". LIS-34400 $129.
Low Profile Oil/Fuel Filter Canister Sockets: 5.9L Cummins Fuel Filter Socket has a low profile 29mm hex opening, 3/8” Dr. & is used on the raised hex on the fuel filter housing. LIS-14600 $9.95 3/16" Tubing bender pliers. Bends 3/16” brake lines without kinking or flattening, expecially in tight spots. LIS-44150 $33.45 Also Available: 1/4” size Tubing bender pliers. LIS-44070 $36.95 Pneumatic Rear Brake Caliper Tool Kit. Comes with 5 popular size adapters and storage case. LIS-65450 $199.
Improved Air Bag Release Tool for GM vehicles. ! 39mm 12 Point Axle Nut Socket for Toyota. Single spring brake tool releases tension on both large and small GM single spring brakes during servicing. LIS-50600 $34.95 Adjustable – universal cam holder / turning tool works on all single and dual overhead cam sprockets with holes. LIS-38220 $42.95 Removes and installs axle nuts on 4WD axle hubs on 2007-2010 Toyota Tundra, 2008-2010 Toyota Land Cruiser, 2008-2010 Toyota Sequoia, 2008 Lexus LX570.
Time Savers! CV Boot Clamp Pliers for ear-type clamps. LIS-30800 $33.50 Extra Long Gasket Cleaning Assembly for hard to reach surfaces. Use with air die grinder. Comes with 2 - 2” Roloc style surface prep discs. LIS-22500 $23.50 Test Lead Kit for Relay Test Jumpers Use with 56810 or 60610 to easily and securely connect relay test jumper to a multimeter. LIS-69200 $ 19.95 Brake caliper brush. Great for cleaning mounting surfaces. LIS-13410 $7.95 GM ECOTEC water pump sprocket holder. LIS-13800 $38.
Plastic Low Profile Creepers Specialty Products !Body fitting design,7/8”clearance !38” length with 6 pop-in wheels Set of 4 disconnects for “quick connect push-in” connectors found on heavy duty truck air systems such as brakes, steering, suspension, etc. Sizes: 5/16”, 3/8”, 1/2”, 5/8”. LIS-42090 $30.75 Available in Red LIS-92102 Yellow LIS-93102 Blue LIS-94102 Your Choice Only $89.95 Ford Caster/Camber Adjusting Wrench 21MM For ‘98-2005 Explorers & Rangers, ‘97-2003 F150 and ‘97-2002 Expeditions.
NEW Tools from 5 Liter Reservoir Fluid Dispensing Pump ATF Refill System Fill or top-off master cylinders, differentials, or any reservoirs. Performs hydraulic brake and clutch bleeding with addional adapters sold separately. MV-6400 $194.95 for sealed automatic transmissions. Includes 10 adapters for Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes and Volvo transmissions. MV-6410 4 Piece Hose Remover Set Contains long and short, standard and offset hooks. Also sold individually. LIS-80200 $34.
10 pc Cap Style Oil Filter Wrench Set covers 95% of automotive applications. 65-100mm in 3/8” Dr, complete with carrying case. LIS-54920 $51.95 8 U.S. Gallon polyethylene oil lift drain. LIS-T11102 $129.95 Bearing Packer - flushes out old grease and repacks. LIS-34550 $26.95 Oil and grease seal puller. LIS-56750 $10.65 Toyota/Lexus End Cap Filter Wrench ( 65mm x 14 Flutes ). LIS-54930 $6.95 5 Position Adjustable Head Seal Puller is ideal where clearance is a problem. LIS-56650 $16.
70 Visit our website at WWW.AUTOFORCE.CA.
3/8” Dr 10 pt 12 mm Specialty Socket for Dodge, Mitsubishi and Honda Civic. VIM-V10PT $16.95 8 Piece XZN Triple Square Drive Set 9” long 1/2” Impact Extension 10 Piece 1/4” Drive T10-T50 Half Cut Torx. 3/4” overall length. VIM-HCT1050 $36.95 4, 5, 6, 8, 10, 12, 14, & 16mm for German cars. VIM-XZN100 $34.95 Turbo Extension - Free spinning knurled aluminium bearing can be held without grabbing or pinching. VIM-TE500 $49.95 18 Piece Long Blade Set T10 - T50 both 4.5” and 8” long. 1/4” or 3/8” drive.
Professional Rotary Drum Pumps. Fully Automatic Pneumatic Grease Gun FM approved. LIN-1387 $269.95 Fluid Types: Gasoline, diesel, coolant, kerosene, non-corrosive materials, medium-viscosity petroleum based fluids, hudraulic oils, ATF. Get a FREE LIN-58000 with the purchase of a LIN-9917. 40:1 Pump Ratio Features variable speed trigger, plate steel barrel with flip-over follower for bulk or cartridge, comfortable grip handle and comes complete with 30" high pressure hose. LIN-1162 $87.
20 US gallon capacity, Pro Series used oil drain with air assist. Telescopes between 44” to 72” range. Protected sight gauge for easy fluid level monitoring. Value Series Air Hose Reels, complete with 50’ H.D. rubber hose and ball stop, mounting base for easy attachment to ceiling, wall or work bench. LIN-3614 $619.95 Freight Extra Pressurized 26 US gallon capacity used fluid tank is made of high-strength polyethylene. Evacuates easily using shop air. Telescopes from 52” to 78”.
$Call $Call $469.95 $112.50 $647.50 $159.95 $262.95 $319.95 $319.95 $67.95 $68.95 $109.95 $111.95 $337.95 74 Visit our website at WWW.AUTOFORCE.CA.
$299.95 $427.95 $649.95 $107.50 $89.95 $107.95 $172.50 $349.95 $239.95 $1,450.00 $229.95 $359.95 Freight Extra Visit our website at WWW.AUTOFORCE.CA.
series.... Imported Line of Lifting Equipment Built to OTC Standards! Hydraulic Service Jacks 1000lbs. Cap. Transmission Jack (Some Assembly Required) ! 2 1/2 Ton Lifting range 5-20” OTC-1503A $129.95 ! OTC-1793A Foot pump operated Range 35 - 70” $950.00 Freight Extra Freight Extra ! 3 Ton, Lifting range 6 - 23” OTC-1504A $153.95 ! OTC-1794A Air / Hydraulic Range 36 - 75” $1,230.
$229.95 $242.50 $659.95 $799.95 $87.95 $289.95 $329.95 $106.95 $116.60 $359.95 Visit our website at WWW.AUTOFORCE.CA. $165.
25 Ton Capacity Shop Press. Maximum work area of 30" x 46". HEAVY DUTY Truck wheel bearing locknut sockets are made of high-strength steel. 3/4” Dr. Not for use on impact guns.
HEAVY DUTY This diesel engine repair stand has a 6000 lb. capacity with 360 degree rotation for easy service. Adapters sold separately. OTC-1750A Call for Price H.D. folding floor cranes with hydraulic hand pump. Freight Extra Low Profile Transfer Tankers for Waste Oil. 15 US Gallon Reservoir. ! Electric pump OTC-5077 $739.95 Freight Extra Easy Lever Wheel Dollies A Made in U.S.A. !2200lb capacity (Boom retracted) 1650lb (extended).
HEA VY DUTY HEAVY The CH-5 Cheetah Bead Seater makes seating the most difficult bead not only safe but simple, fast and economical. Designed for commercial use on all tires ATV to 24.5” truck tires. The CH-5 has a 5 gallon steel tank. CHT-CH-5 H.D. Universal Joint Puller used with 1” dr. impact gun. Fits virtually all class 7 & 8 H.D. truck & machinery drive lines, without damaging bearing cups, yokes, joints, etc. TGT-10102 $Call Yoke Puller for H.D. truck application with carrying case.
Tire Bead Seaters Duck-Billed Bead Breaking Wedges KT-T11E (30" wood handle) $109.95 KT-TG11E (32" fibreglass handle) Now Only $124.95 One Piece Rubber Tube Construction ! For 14-15” rims on passenger vehicles and light trucks. KT-31446 $59.25 For Truck Applications 37" Tubeless Truck Tire Mount/ Demount Iron for standard truck tires. KT-T45A $72.95 ! For 16 1/2” to 17 1/2” rim sizes. KT-31437 $101.50 !For 19 1/2” rims KT-31438 $101.50 Curved Tire Mount/Demount Spoons ! For 22 1/2” to 24 1/2” rim sizes.
Accutorq’s design allows technicians, mechanics and tire changers to tighten lug nuts on wheels to the manufacturers’ prescribed tightness, automatically. Made of finest steel, Accutorque is ultrasonic tested against metal fatigue, assuring years of reliable service. Available in individual sizes or as sets. 10 piece Car, Mini Van and Light Duty Truck Set includes 1 each of all sizes shown in sturdy carrying case. (Shown) AC-322 $389.
PENLIGHTS 0 to 6” Dial Caliper w/case. .100” per revolution (metal body). STO-3C101 $39.30 Electronic Digital Caliper. 0 to 6” or 150mm (metal body), includes protective case. STO-3C301 $39.95 Brake Drum Micrometers (Dial Gauge) ! SAE Reading. (6-16” ) AMC-8500 $349.95 ! Metric Reading. AMC-8500-50 $349.95 For Trucks 6” to 26” ! AMC-8500-H $419.95 Brilliant white light, up to 10 times as much light as ordinary penlights. Rugged aluminum anodized body. 1 year warranty. Includes 3 AAAA batteries.
Mini-Maglite LED with Holster. FLASHLIGHTS 3 Watt LED. 2 AA-cell. MAG-SP2201H $28.50 3 AA-cell. MAG-SP2301H $28.50 2AAMagLite, Holster and Batteries. Red. MAG-M2A03H $18.50 2AA Black MagLite, Holster and Batteries. MAG-M2A01H $18.50 Replacement Bulb for 2 cell AA and AAA Maglites. MAG-LM2A001 $3.95 Rotating Magnetic 24 LED Work Light. Batteries included. KEYCHAIN PACK 1 AAA black flashlight, batteries & key chain. MAG-K3A016 Sale $7.95 UL-RT-2LT $22.95 LED Penlight / Magnetic Pick up Tool.
4 Piece individual Hook and Pick Set. Cushioned textured grip will not slip in wet or oily hands. UL-CHP4-L $13.95 Made in USA. !Telescopic magnet extends from 16-3/4" to 26-3/4". UL-1 $11.35 Also Available, as above, with extra strong magnet, lifts to 5 lbs. UL-21X $12.80 4 Piece Hook & Pick Set. UL-H4W $7.45 Flexible Spring Claws. UL-16 $6.95 25” Long Spring Flex pick up tool. Magnet on one end only, tightly wound spring made of tempered steel. UL-6FL $10.95 4 Pc.
86 Visit our website at WWW.AUTOFORCE.CA.
$45.65 $19.95 $27.80 $26.95 $23.95 $29.95 $24.95 $34.95 $46.95 Visit our website at WWW.AUTOFORCE.CA.
Safety Ear Muff Protects hearing from noisy environments. Adjustable head bridge. Soft foam padding. AFH-E50 $5.25 4 Piece Polyester Paint Brush Set with wood handle. Two-tone polyester bristles. Brush sizes: 1” (25mm) 2” (50mm) 3” (75mm) 4” (100mm) AFH-P4920 $5.95 Tool Caddy. Features high impact plastic construction, firm grip handle prevents tray from accidentally rotating in your hand. Dimensions: 16” x 12”. AFH-T4802 $11.95 WIL-CP55HTC WIL-CP55HTG WIL-CP55HTM 88 Clear $8.50 TST Gray $10.
Visit our website at WWW.AUTOFORCE.CA.
Fixed Base Vises with Anvil Heavy Duty construction. Jaws & spindle made from reinforced carbon steel. ! 6” Wide Jaws AF-647-6” $129.95* ! 8” Wide Jaws AF-647-8” $199.95* *Freight Extra Swivel Bases Sold Separately! The MegaHammer, weighing in at 65 Lbs. and 38” long, provides the power required to remove seized bearing assemblies and associated components from the vehicle chassis. Includes adapter for 4, 6 and 8 bolt head to service 3/4 and 1 Ton American made trucks. AFK-70390 $499.
Now Supplied with Baffles! PRO-LIFT 5 Year Warranty. Oil King 15 Gallon Portable Oil Drain Ideal for truck & heavy equipment shops. Used oil transfer by either gravity or suction evacuation. Unit measures 41” x 22” x 7”. LD-OD-15 $239.95 Freight Extra 20 Gallon Capacity Deluxe used oil receiver. GO-238-866 $899.95 Freight Extra 10 Ton Pin Style Safety Stands. Min. Height: 19 1/2” Max.
Made in USA. " 9-1/2" plier has 5 adjustments & 1-1/2" capacity. Order No. CH-420 $17.95 " 10" plier has 7 adjustments & 2 inch capacity. Order No. CH-430 $18.95 " 12" plier has 7 adjustments & 2-1/4" capacity. Order No. CH-440 $19.95 " 16" plier has 8 adjustments & 4-1/4 capacity. Order No. CH-460 $33.95 " 20" plier has 12 adjustments & 5 1/2” capacity. Order No. CH-480 $66.95 " 9-1/2" curved jaw plier has 1-1/8 inch capacity. Order No. CH-410 $19.95 " 14" curved jaw plier has 2 inch capacity. Order No.
H.D. Steel Adjustable Pipe Wrenches. Drop forged, hardened & tempered alloy steel, heat treated. ! ! ! 18” AFH-P7150 $18.45 24” AFH-P7200 $25.65 36” AFH-P7250 $45.95 Aluminum Adjustable Pipe Wrenches. Drop forged, hardened & tempered aluminum alloy, heat treated. ! ! 24” AFH-P7455 $42.95 36” AFH-P7510 $85.95 Drop Forged Chrome Plated Adjustable Wrenches. ! ! ! ! 12” 15” 18” 24” AFH-W6400 AFH-W6450 AFH-W6500 AFH-W6550 $10.75 $20.50 $30.95 $51.95 Heavy Duty Bolt Cutter. Hardened and tempered.
B-503 CFD-2606 B-810 CFT-2710 B-896 CFB-2711 B-848 CFS-3708 B-860 CFT-4211 BR-865 PRT-4209 BR-848 PRS-3708 Ball Bearing Slides. B-853 CFB-4216 BR-855 PRB-4213 B-541 CFS-3001 Part No.
53” Wide Professional Series Combination Cabinet and Chest Features: % Heavy duty double wall construction for added strength. % Quadra level ball bearing slides for easy access to tools. % High gloss powder coat scratch resistant paint. % Heavy duty bottom support rails for heavier loads. % Sturdy 5” x 2” casters. % Heavy duty 14 gauge caster rails to support heavy loads. % Includes pre-cut drawer liners. ! 9 Drawer Chest 52-17/32” W x 17-7/8” D x 22-1/4” H SPG-PRT-5209RD (Red) $895.
DOUBLE BONUS: FREE Dominator 42" & 48" Pry Bars with purchase of MH-61356 Ratcheting cable operated hose clamp plier. MH-28640 $118.85 Dominator® 3 Piece Heavy Duty Pry Bar Set The Stud Extractor is adjustable to fit studs from 1/4” (6mm) to 1/2” (12mm). Use with 3/8” Dr. air impact to remove rusted, broken, smooth, threaded & stripped studs. MH-29895 $77.70 Includes 18", 24" and 36" pry bars. Capped-end handles allow you to strike the pry bar with a hammer. MH-61356 $143.
Precision Instruments Detachable Handle! Redesigned Micrometer Adjustable Torque Wrenches with Ergonomic Nylon Handles. Includes Blow Molded Case. Made in USA. Flex Head Torque Wrenches Featuring “split beam” torque measuring mechanism. With Case. !3/8” Drive, 20 to 100 ft/lbs. in 2 ft/lbs increments. PI-C2FR100F $169.95 !1/2” Drive, 40 to 250 ft/lbs. in 5 ft/lbs. increments. PI-C3FR250F $219.
3 Pc. Locking Plier set Made In U.S.A. Includes: VG-5WR VG-10WR VG-6LN Order No.VG-321GS Vise Grip Locking C Clamps 6 Inch VG-6R $13.25 11 Inch VG-11R $19.95 18 Inch VG-18R $31.95 24 Inch VG-24R $39.95 $46.95 4 Piece Locking Plier Set 6 Piece Vise-Grip Set in pouch with Koozie Cups. Includes 10WR, 9LN, 7WR, 6LN, 5WR, 4LN. VG-641KB $69.95 Includes 10”(10CR) curved Jaw, 7”(7R) straight Jaw, 5”(5WR) curved Jaw with cutter & 6”(6LN) long nose pliers and pouch. VG-428GS $53.
$54.95 $59.95 $109.95 $69.95 $203.95 $99.95 $149.95 $39.95 $299.95 $79.95 $11.95 Visit our website at WWW.AUTOFORCE.CA.
100 Visit our website at WWW.AUTOFORCE.CA.
270pc HNBR O-Ring Assortment For R134a Air Conditioning Systems. Contains the 18 most popular sizes. Convenient resealable plastic case. TTN-45201 $9.95 Wide-View Solar Powered Welding Helmet 18pc Die Grinder Set Includes, straight die grinder, angle die grinder, 10 grinding stones, 2 connectors, 1 collet, 4 wrenches and a blow mold case. TTN-19701 407pc SAE O-Ring Assortment Contains the 32 most popular sizes of SAE o-rings. Constructed of Buna-N BG715 (Nitrile 70 Shore) rubber.
$37.95 $14.95 $23.95 $7.95 $54.95 $12.95 102 Visit our website at WWW.AUTOFORCE.CA. $8.
$129.95 $159.95 $39.95 $14.65 $12.95 $24.95 Visit our website at WWW.AUTOFORCE.CA.
SURFACE CONDITIONING PRODUCTS BY Abrasives and Cutting Tools General Purpose Wheels Scotch-Brite surface conditioning discs are ideal for cleaning light oxidation & removing gasketing residue in various automotive applications. 2" SCREW ON TYPE - 10 / Pk. TM-5523 Very Fine Sale $13.15 TM-5527 Medium Sale $13.15 TM-5528 Coarse Sale $13.15 3" SCREW ON TYPE - 10 / Pk. TM-5531 Medium Sale $28.50 TM-5532 Coarse Sale $28.50 for Bench Grinders Medium Grit (A46) 6” x 3/4” x 1” - 4,100 RPM. AF-A675M $14.
All Flex-Hone Sizes and Grits Available. Flex-Hones for Brake Cylinders, Hydraulics, Valve Guides, etc... Item # BRM-BC55M18 BRM-BC64M18 BRM-BC7M18 BRM-BC8M18 BRM-BC9M18 BRM-BC95M18 BRM-BC10M18 BRM-BC11M18 BRM-BC12M18 BRM-BC14M18 BRM-BC18M18 BRM-BC20M18 BRM-BC1218 BRM-BC5818 BRM-BC3418 BRM-BC7818 BRM-BC10018 BRM-BC11818 BRM-BC11418 BRM-BC13818 BRM-BC11218 BRM-BC15818 BRM-BC13418 BRM-BC20018 BRM-BC21418 BRM-BC21218 BRM-BC23418 BRM-BC30018 Size 5.5 mm 6.4 mm 7 mm 8 mm 9 mm 9.
3 Pc. Unibit Step Drill Set with range of 1/8” to 3/4”. Contains Nos. 1, 2, 3. UB-502 $87.95 Quick Fire self-igniting torch with 16.92oz. propane cylinder. BZ-TS3000KC $49.95* 3/8” Rotary spotweld chisel. SG-18000 Sale Price $12.95 Replacement pack of 3 blades for the above. SG-18025 Sale Price $26.25 UB-502T Titanium $89.95 No. 1 Step Drill covers 13 hole sizes from 1/8” to 1/2”. 1/4” shank. UB-1 $26.95 (Not Shown) Also Available, above bit with Titanium coating for longer life. UB-1T $32.
29 Pc. HSS General Purpose Drill Bit Set in index. 41 Pc. Fractional Tap & Die Set. Sizes from No. 4 to 1/2” plus 1/8” NPT & tap wrenches, die stock, thread gage, s/d, plastic storage case. HAN-24606 $128.50 " Range of 1/16 to 1/2” by 64th. 3/8” Reduced Shank from 25/64 - 1/2”. HAN-60148S $89.95 41 PC. Metric Tap & Die Set. 3mm-12mm, tap wrench, die stock, thread gage, s/d, plastic storage case. HAN-26317 $125.75 " Hex Head – Multi spline Extractor Sets in plastic storage case: "25 Pc.
Lock-On Switch 13 Amp, Orbital cutting action Super Sawzall reciprocating saw. 115V, 0-3000 strokes per minute, variable speed trigger, 1 1/4” stroke. MW-6536-21 $295.50 5” Random Orbit Palm Sander with Dust Collection. 3.0 amp electric motor, variable speed range 7,000 to 12,000 RPM. MW-6021-21 $124.95 4 1/2” Angle Grinder, 120AC-V 10,000RPM. 10 amp motor 5/8”-11 spindle thread. MW-6148-30 $149.95 1/2” Cap. - 115V H.D. Magnum Drill, 8.0 amp motor, variable speed control, 0-850 RPM. Keyed Chuck.
120V 40% Duty Cycle @ 90 Amp at 18V. Maximum 135 Amp MIG Welder welds solid or flux core wire, complete with Tweco style gun. FP-1444-0326 $699.95 230V 3/8" Max Weld. 40% Duty Cycle @ Max 60 Amp Output. CUTMASTER 52, manual plasma cutting system. input voltage of 230V single or 230/460V 3 phase. Uses your air supply. Maximum cut of 1 1/8”. FP-1-5130-1 $2,295.00 Complete “Except the Gas” Portable Tote Package. Only 35 lbs.! Ideal for in-the-field repairs & on the spot maintenance work. 12-1/2’ hoses.
1/4" Dr. “Palm” Air Ratchet. 16 ft/lbs of torque. Only 5 1/2" long. AST-1111 $63.55 “Skin-Off” Air Operated Door Skin Removal Tool Complete Oxyacetylene Welding Outfit. Comes with torch handle, cutting attachement, check valve, oxygen regulator, acetylene regualtors, nozzle tips, 15’ twin hose, sparklighter, goggles & tip cleaners. AST-8080 $359.95 Includes FREE Designed to maneuver around inner and outer curves as well as most body design features. 1/2 HP Motor. AST-DS2000 $239.
FREE 45 Piece Tire Repair Kit the purchase of an AST-2181 Burr Set. Set includes a heavy duty steel T-handle insert tool, heavy duty steel T-handle spiral probe reamer, 2 replacement tool 3mm Allen wrenches, lubricant and 40 pieces of 4” tire repair string (tire plug). AST-7445 $28.95 AST-9430 1206A Die Grinder with $48.95 Grease Fitting Adapter Set includes press-on 90 degree angle, straight, slide-on 90 degree, rubber tipped, needle and 360 degree adapters along with a 12” extension in a case.
7 Piece Sensor & Sending Unit Socket Set. AST-7801 11 Piece Disc Brake Pad and Caliper Service Kit for domestic and import vehicles. Features magnetic socket adapter. AST-7860 $59.95 $65.95 15 Pc. Master Diconnect Set works on fuel, transmission, oil cooler and A/C lines. AST-78930 $47.95 8 Piece Fuel and Transmission Line Disconnect Tool Set. AST-7892 $35.05 Hose Clamp Plier. Re-engeineered double gear lock lever with wider and deeper gears for secure locking.
8 in 1 Design Metric Multiple Head Socket Wrench includes 12mm through 19mm. Ideal for drain plugs. Built-in magnet allows wrench to be hung so that it is always handy and/or holds oil plugs, nuts, etc... AST-7129 28.95 7 Piece Impact Socket Set With plastic sleeves and shallow broach to protect wheels and decorative lug nuts. Metric sizes: 17, 19 and 21mm. SAE sizes: 13/16" 7/8", 1", 1 1/6". AST-7870 $79.60 4pc. 1/2" Drive Thin Wall Flip Impact Socket Set with Protective Sleeve 21 Piece Set. 3/4" dr.
1/4” Drive Air Ratchet with updated body design. Under 7 1/2” long. Ideal for under dash work. Max 25ft/lbs torque. 280 RPM. IR-105-D2 $102.95 Also Available: 1/4” Drive Extended head Air Ratchet is 8.4” in length. Ideal for longer reach applications. IR-105-L2 $169.95 1/4” Drive Premium Air Ratchet is less than 7 1/2” long, features nickelplated housing for corrosion resistance, composite handle insulates from the cold and feather touch lever offers full range of performance between off and on. 30 ft/lbs.
TITANIUM - 1” Drive Max. Torque: 1,650FT/LBS. 1/2” Dr. H.D. Impact Gun Ideal for high volume fleet tire service centre, with a weight of 16 lbs. and “chainsaw” handle. IR-2190Ti-6 $969.95 Max. Torque: 590 ft/lbs. - 8,000 RPM In-Handle exhaust directs air away Composite from the operator and work. Body. IR-231HA $158.95 Weighs just 7lbs. Best power-to-weight ratio in its class. IR-2141K $634.95 Imp d rove ! IR-2141 Kit Includes: 3/4” Impactool Max Torque 1200 ft/lbs # 3/4” Dr.
New Housing Design! Pistol-Grip reversible screwdriver is compact, lightweight & maneuverable. High-speed (22,000 rpm) tire buffer. It’s great for service work on HVAC IR-327 $75.95 systems, instrument panels and trim components. IR-371 $144.95 Tire Buffer with quick change chuck and piped-away exhaust. IR-327LS $129.95 3/8” Capacity Reversible Angle Drill, 1800 rpm , 1/3 HP. IR-7807R $111.95 27,000 RPM Mini Die Grinder. IR-307A 3/8” Heavy Duty Air Drill has a free speed of 2000 RPM.
5/8” x 11 Thread. IQv Series Cordless Package Deals High Performance 4 1/2” Air Angle Grinder. Weighs less than 3.5 lbs. .88 HP motor with 12,000RPM. Features internal governor that maximizes speed under load. IR-3445MAX $344.95 High Speed Sander, 18,000RPM comes with 3, 4 and 5” backing pads. Built-in power regulator. IR-317A $79.95 7.2V 1/4” Quick Change Hex Drive Impactool. 2200 RPM/2500BPM 40ft/lbs Max Rev Torque 7” H.D.
A GRACO COMPANY IQv Series Cordless 7.2 volt ¼” Dr. Ratchet delivers 25ft/lbs of torque. Package includes ratchet, 2 Li Ion batteries, charger and carrying bag. IR-R140-P2 $Call NON-HVLP SPRAY GUNS Cobalt-Value line at only 19 oz., this light production spray gun minimizes fatigue. 1.8mm tip. SH-5235 $179.95 Powerful, precision assembled high performance all purpose straight line sander. HU-2000 $399.95 Also available - Ratchet only. IR-R140 $159.95 Lightweight low profile, 6” random orbital sander.
Tram Gauge. Gravity sandblast gun has an 18 oz. hopper capacity. ¼” NPT air inlet, 7/32 nozzle. 7CFM @ 90PSI. AR-52-H120G $59.95 Deluxe pressure sandblasting outfit, 100lb. capacity complete with 8’ hose and large automatic valve, water filter, hood , hardhat. Air consumption 18CFM. AR-52-G800 525.00 Freight Extra. Waterbase Compliant LVLP Gravity Paint Gun Kit. Kit includes Pro-Series spray gun with 1.3mm tip, regulator, brush, cup strainer and cleaning needle. AR-20-450GK $174.
$ 339.95 $529.95 $ 159.95 $ 549.95 $79.95 120 Visit our website at WWW.AUTOFORCE.CA.
Made in U.S.A. 2 Piece Wheel Flip Socket Removal Set 1/2” Drive. Includes 3/4” - 21mm, 7/8” - 15/16” and punch. AF-920 $49.95 Supreme Master Automotive Lock Out Kit This 18 piece kit is the ultimate product available to handle emergency lock out situations. Includes the Inflate-A-Wedge, a fully illustrated manual and a blow molded case. LTI-1000 $189.
$285.95 $385.00 122 Visit our website at WWW.AUTOFORCE.CA.
(Cartridges sold separately.) (Cartridges sold separately.) Also available, organic vapour/acid gas cartridges for above masks. Sold in box of 6 only. Order Part Number B100300. Visit our website at WWW.AUTOFORCE.CA.
Eyewash Station Bullseye Extreme Ops Knife 3.5” Stainless steel blade, 4.6” aluminum handle and comes with a pocket clip. Weighs 3.9oz. SW-CK6ACP $19.95 NASCAR Team Series Gloves Incredibly comfortable, have a tough spandex top with long lasting deer skin leather palms for protection from vibration & sharp objects. A. Extreme Ops 2 Knife 3.3” Stainless steel lock-back blade, 4.4” aluminum handle, weighs 3.9 oz. SW-SWA2CP $19.95 Extreme Ops Knife With Frame Lock, 3.3” Stainless steel blade, 4.
AIR TOOLS Heavy Duty Zip Gun Air Hammer Kit with 4 chisels in case. 2,000 blows per minute. CP-714K $479.95 Featuring MgDriven Technology, this light, compact and powerful 1/2” impact gun weighs just 2.7lbs., is 6.3” long with over 500 ft-lbs. of maximum torque. CP-7740 Versatile, handling a wide range of body shop applications including front end, exhaust, frame and body work. $319.95 Super Duty Air Hammer Kit with 0.498 shank includes 4 chisels and case. 1,800 blows per minute @ 90 PSI. CP-717K $797.
AIR TOOLS CP-797-6 $814.95 CP-724H $204.95 3/8” H.D. Impact Max. torque 200 ft/lbs. Now with rubber comfort grip. 1” Dr. - Impact Gun w/6” anvil, 900 ft/lbs. of working torque. Ideal for truck tire work. CP-734H $139.50 1/2” Dr. H. D. Impact with rubber comfort grip. Max Torque 375 ft/lbs. !Also available with 4 chisels & carrying case. CP-7111K $82.95 1” Dr. H.D. Impact Gun with 6” Anvil. 1200 ft/lbs. of working torque with four position power control in forward and reverse - less than 26 lbs.
AIR TOOLS CP-870 $69.95 Value Priced - 6” pad dual action sander - 10,000 RPM CP-7300 $134.95 CP-876 $79.95 Mini Die Grinder 30,000 RPM less than 5” long comes with 1/4” & 6mm collet. CP-858 $279.95 1/4” Mini Air Drill - 2,800 RPM Weighs less than 1.5 lbs. CP-7300R $164.95 CP-872 $69.95 Value priced die grinder 22,000 RPM - less than 6” long, comes with 1/4 & 6mm collet. Belt Sander is excellent for paint removal, weld sanding, smoothing and rust removal.
Index by Brand 3M 104 ACCUTORQ 82 AIRCAT BC AIRMASTER 37 ALL POWER 17 ALLEN 45 AMMCO 83 ARMSTRONG 60 ARSLAN 119 ASSOCIATED 1 ASTRO 110-113 AUTO-FORCE F.I. 34 BACHARACH 25 BDT 32 BERNZOMATIC 106 BLUE BOY 5 BONE CREEPER 19 BOOSTER PAC 2 BRICO 88,93 BRM 105 CALVAN 105 CAPACITY 90 CARICA 96 CENTRAL 82,84,97 CHANNELLOCK 92 CHEETAH 80 CHRISTIE 3 C.P. 125-127 CPS 24,25,33,36 CRUSHPROOF 36 DEVILBISS 120 DSR IFC EKLIND 54 E.S.
Coupler Body 1/4” Milton Part No. MIL-715 Sale Price $6.15ea 1/4” ARO style MIL-775 $7.65ea 1/4 Lincoln MIL-790 $10.85ea LARGE BORE CHUCK Fittings Size/Connection 1/4 Male 1/4 Female 1/4 Male 1/4 Female 1/4 Male 1/4 Female Style Milton Milton Aro ARO Lincoln Lincoln Part No. Sale Price MIL-727-DP $2.80 /PK 2 MIL-728-DP $2.80 /PK 2 MIL-777-DP $2.80 /PK 2 MIL-778-DP $2.80 /PK 2 MIL-791-DP $4.05 /PK 2 MIL-792-DP $4.65 /PK 2 P-Style coupler. 1/4” Female. EXTENDED REACH MIL-1803 $13.
