Replacement Part List

ManualsBrandsAll Power ManualsGenerators5000-Watt Manual Start Gasoline Powered Portable Generator with Mobility Kit

PART # KEY #

BIN

LOCATION

DESCRIPTION HYPL

G9.0-A-01-JD 1 CYLINDER HEAD BARE G9.0HP CYLINDER HEAD

G9.0-A-02-JD 2 CYLINDER HEAD GASKET G9.0HP CYLINDER HEAD

JF168F7TC 3 SPARK PLUG (F7TC) G9.0HP CYLINDER HEAD

G9.0-A-04-JD 4 VALVE COVER G9.0HP CYLINDER HEAD

G9.0-A-05-JD 5 VALVE COVER GASKET G9.0HP CYLINDER HEAD

HDW-A-M8X105

6 INTAKE STUD (M8X105X1.25) G9.0HP CYLINDER HEAD

HDW-B-M8X35

7 EXHAUST STUD ((M8X35X1.25) G9.0HP CYLINDER HEAD

HDW-C-04 8 DOWEL PIN (Ф12X20) G9.0HP CYLINDER HEAD

HDW-D-M10X80 9 CYLINDER HEAD BOLT (M10X80X1.25) G9.0HP CYLINDER HEAD

HDW-E-M10X60 10 VALVE COVER BOLT (M10X60) G9.0HP CYLINDER HEAD

HDW-P-01 11 GROMMET (M10,TAPERED) G9.0HP CYLINDER HEAD

HDW-Q-01 12 GROMMET WASHER (M10) G9.0HP CYLINDER HEAD

G9.0-B-01A-JD 1 CRANKCASE ASSEMBLY (W/O ELECTRIC START) G9.0HP CYLINDER BLOCK

G9.0-B-02-JD 2 OIL LEVEL SENSOR G9.0HP CYLINDER BLOCK

G6.5-B-03B-JD 3 OIL LEVEL SWITCH (4 WIRES) G9.0HP CYLINDER BLOCK

G9.0-B-04-JD 4 GOVENOR GEAR ASSEMBLY G9.0HP CYLINDER BLOCK

G6.5-B-07-JD 5 OIL LEVEL SWITCH HARNESS G9.0HP CYLINDER BLOCK

HDW-BB-05 6 OIL SEAL (Ф30XФ46X8) G9.0HP CYLINDER BLOCK

HDW-CC-6206 7 BEARING (6206) G9.0HP CYLINDER BLOCK

HDW-H-02AL 8 COMPRESSION WASHER (M12) G9.0HP CYLINDER BLOCK

HDW-G-M12X15 9 OIL DRAIN BOLT (M12X15X1.5) G9.0HP CYLINDER BLOCK

HDW-G-M6X12 10 HEX HEAD FLANGE BOLT (M6X12X1.0) G9.0HP CYLINDER BLOCK

HDW-G-M6X15 11 HEX HEAD FLANGE BOLT (M6X15X1.0) G9.0HP CYLINDER BLOCK

HDW-K-M10 12 FLANGE NUT SERRATED (M10X1.25) G9.0HP CYLINDER BLOCK

HDW-AA-01 13 O-RING (10 MM) G9.0HP CYLINDER BLOCK

HDW-RR-01 14 WIRE CLIP G9.0HP CYLINDER BLOCK

G9.0-C-01A-JD 1 CRANK CASE COVER GENERATOR G9.0HP CRANK CASE COVER

G9.0-C-02-JD 2 CRANK CASE COVER GASKET G9.0HP CRANK CASE COVER

HDW-BB-05 3 OIL SEAL (Ф30XФ46X8) G9.0HP CRANK CASE COVER

A CYLINDER HEAD

B CYLINDER BLOCK

C CRANK CASE COVER ASSEMBLY

Summary of content (9 pages)

PAGE 1
PART # KEY # BIN DESCRIPTION LOCATION HYPL A CYLINDER HEAD G9.0-A-01-JD G9.0-A-02-JD JF168F7TC G9.0-A-04-JD G9.0-A-05-JD HDW-A-M8X105 HDW-B-M8X35 HDW-C-04 HDW-D-M10X80 HDW-E-M10X60 HDW-P-01 HDW-Q-01 1 2 3 4 5 6 7 8 9 10 11 12 CYLINDER HEAD BARE CYLINDER HEAD GASKET SPARK PLUG (F7TC) VALVE COVER VALVE COVER GASKET INTAKE STUD (M8X105X1.25) EXHAUST STUD ((M8X35X1.25) DOWEL PIN (Ф12X20) CYLINDER HEAD BOLT (M10X80X1.25) VALVE COVER BOLT (M10X60) GROMMET (M10,TAPERED) GROMMET WASHER (M10) G9.
PAGE 2
HDW-CC-6206 HDW-C-04 HDW-G-M8X35 HDW-EE-02 HDW-AA-03 FL 4 5 6 7 8 D CRANK SHAFT ASSEMBLY G9.0-D-01B-JD 1 HDW-V-01 2 BEARING (6206) DOWEL PIN (Ф12X20) HEX HEAD FLANGE BOLT (M8X35X1.25) OIL DIP STICK (M26) O-RING FLAT (26 MM) G9.0HP CRANK CASE COVER G9.0HP CRANK CASE COVER G9.0HP CRANK CASE COVER G9.0HP CRANK CASE COVER G9.0HP CRANK CASE COVER CRANKSHAFT ASSEMBLY (TAPERED SHAFT) MOON WOODRUFF KEY (18MM) G9.0HP CRANKSHAFT G9.0HP CRANKSHAFT E PISTON AND CONNECTING ROD ASSEMBLY G9.0-E-01-JD 1 PISTION G9.
PAGE 3
G RECOIL STARTER ASSEMBLY G9.0-G-01-JD 1 HDW-G-M6X12 2 RECOIL STARTER HEX HEAD FLANGE BOLT (M6X12X1.0) G9.0HP RECOIL STARTER G9.0HP RECOIL STARTER H FAN COVER ASSEMBLY G9.0-H-01A-JD 1 G9.0-H-03-JD 2 G9.0-H-04-JD 3 HDW-G-M6X12 4 HDW-G-M6X15 5 HDW-R-M5X10 6 HDW-QQ-01 7 HDW-SS-01 8 FAN COVER (W/O ELECTRIC START) CYLINDER BLOCK HEAT SHIELD GENERATOR FAN SHROUD HEX HEAD FLANGE BOLT (M6X12X1.0) HEX HEAD FLANGE BOLT (M6X15X1.0) PHILLIP SCREW (M5X8X0.75) HARNESS RETAINER HOSE RETAINER G9.0HP FAN COVER G9.
PAGE 4
G9.0-L-01-JD G9.0-L-02-JD G9.0-L-03-JD G9.0-L-05-JD HDW-MM-03 HDW-NN-03 HDW-II-01 HDW-J-M6 HDW-G-M6X12 HDW-N-M8 HDW-W-02 1 2 3 4 5 6 7 8 9 10 11 GOVERNOR ARM SHAFT GOVERNOR ARM GOVERNOR BASE ASSEMBLY GOVERNOR ROD THROTTLE RETURN SPRING (146 MM) SPEED GOVERNOR SPRING (215 MM) GOVERNOR BOLT (SPECIAL, M6X20X1.0) NUT (M6X1.0) HEX HEAD FLANGE BOLT (M6X12X1.0) FLAT WASHER (M8) GOVERNOR ARM SNAP PIN (10 MM) G9.0HP GOVERNOR G9.0HP GOVERNOR G9.0HP GOVERNOR G9.0HP GOVERNOR G9.0HP GOVERNOR G9.0HP GOVERNOR G9.
PAGE 5
G9.0-N-07-JD G9.0-N-08-JD HDW-J-M8 HDW-K-M5 HDW-K-M6 HDW-K-M8 HDW-N-M6 HDW-O-M8 KIT-G9.0-NE-JD 6 7 8 9 10 11 12 13 14 AIR CLEANER SUPPORT BRACKET BREATHER TUBE NUT (M8X1.25) FLANGE NUT SERRATED (M5X0.75) FLANGE NUT SERRATED (M6X1.0) FLANGE NUT SERRATED (M8X1.25) FLAT WASHER (M6) LOCK WASHER (M8) AIR CLEANER ASSEMBLY (EPA) G9.0HP AIR CLEANER G9.0HP AIR CLEANER G9.0HP AIR CLEANER G9.0HP AIR CLEANER G9.0HP AIR CLEANER G9.0HP AIR CLEANER G9.0HP AIR CLEANER G9.0HP AIR CLEANER O FUEL TANK ASSEMBLY G6.
PAGE 6
Q WHEEL KIT G6.5-Q-01-JD G9.0-Q-02-JD G6.5-Q-03-JD APGG6000-Q-04-JD G9.0-Q-05-JD HDW-GG-01 HDW-G-M6X35 HDW-G-M6X15 HDW-K-M6 HDW-K-M8 HDW-N-M20 HDW-JJ-01 1 2 3 4 5 6 7 8 9 10 11 12 WHEEL (8") AXLE AXLE BUSHING HANDLE ASSEMBLY FRAME SUPPORT RUBBER FOOT (Ф27X28, W/ BOLT) HEX HEAD FLANGE BOLT (M6X35X1.0) HEX HEAD FLANGE BOLT (M6X15X1.0) FLANGE NUT SERRATED (M6X1.0) FLANGE NUT SERRATED (M8X1.
PAGE 7
HDW-R-M5X12 HDW-R-M5X15 HDW-CC-6204RS 20 21 22 PHILLIP SCREW (M5X12X0.75) PHILLIP SCREW (M5X15X0.75) BEARING (6204RS) G9.0HP GENERATOR G9.0HP GENERATOR G9.
PAGE 8
NOTES MSRP:$7(GEAR)+$0.24(SLIDER)+$3(GEAR WASHER)+$0.24(WASHER)+$1(SHAFT)=$11.
PAGE 9
SOLD W/ CONNECTING ROD