tordless lmpatt Wrenth & Llght
which may ignite the dust or fumes PRODUCT SPECIFICATIONS Hem Elscrrlcal Rsqunrements Drlve S l l s Trigger Type Daserlptlon Power o u l p u t t 9 2 v D c Power Input 120 VACwo Hz Cnarger Baltery Type 1 7Ah NI-Cd charge Time. 1 Hour Fasl Charge Charqsr Power Plug 2 Prong Polar~zetl 1R" Uar#4DleSpeed - Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught In moving parts Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugglng in power tools w~ththe Power Swltch on, Invites accidents.
unplug the Charger by pulling on the Power Card. Keep the Power Cord away from heated surfaces 8. 9 10. 11. -. - I SYMBOLOGY To avoid electrical shock, do not handle the Charger (391, its Power Cord Plug, or the lmpact Wrench with wet hands. D l Canadlan StandaKls Association Keep the Handle of the Impact Wrench dry, clean, free from oil and grease. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the lmpact Wrench.
. Battery i37): The power source for the Impact Wrench is a rechargeable, 19.2VDC Battery. Make sure to follow all safety precautionswhen working with the Battery. (See Figure D.) 6. Charger (39): The Charger is powered by plugging its Power Plug into a 120 volt, grounded, electrical outlet. NEVER attempt to power the Charger wlth any other electrical source other than a 120 volt, grounded electrical outlet. (See Figure D.) 5. Verify that the RED Charging Indicator Ught comes on.
INSPECTION, MAINTENANCE, AND CLEANING 1. /7\ WARNING! Always let the Trigger (36) rest in Its "OFF" position, remove the Battery (37) from the tool, and unplug the Charger (39) from its electrical outlet before performing any inspection, maintenance, or cleaning. 2. Before each use: Inspect the general condition of the lrnpact Wrench.
Worklight (cont'd) Worklight Specifications adjustable head bulb housing - switch Item Value Charger input voltage 110-120V Charger output voltage 19.2V Battery voltage 19.2V Power 10W Turning on and off Grip the work'light firmly with your index finger on the on-off switch.
Worklight (cont'd) Changing the bulb CAUTION: ALWAYS REMOVE BATTERY BEFORE CHANGING THEBULB. Maintenance Clean the tool with a rag dampened with clean water. Do not use chemicals or soap. Do not allow water to get inside the tool. Make sure the vent passages remain clear of dust and debris to avoid overheating the tool. Store the tool in a clean dry place. m All repairs must be performed by a qualified electrician. a Opening the tool voids the warranty.
Limited Warranty Limited Warranty (cont'd) All-Power Arncrica warrants to the original purchaser who uses the product in a consumer application (personal, residential or household usage) that all products covered under this warranty are free from defects in material and workmanship for one year from the date of purchase. All products covered by this limited warranty which arc used in commercial applications (i-e.
